View Full Version : ok QUESTION
08-25-2007, 03:32 AM
How do you measure the cubic feet inside of a box when building it? thanks
IM going to try and build a ported box for 3 12" subs at 1.2 Cubic feet per sub
08-25-2007, 03:42 AM
1.2 seems a tad small for a 12" but here
08-25-2007, 07:47 AM
Which drivers are they? As stated 1.2 definitely seems a bit too small for a ported 12. Most 12s require that much space sealed.
08-25-2007, 11:14 AM
You get the desired volume before you build the enclosure. That's involved in the design, not the construction.
The easiest way is to use Sketchup to build the enclosure in a 3D environment and then leave the top off. From there, select the section of the bottom and get the area from it. Multiply that number by the height to get the total volume of the enclosure. If the height is in inches, divide it by 12 to get the cubic feet of the enclosure.