View Full Version : need enclosure designer

08-23-2007, 12:07 PM
I am getting a JL audio 10" W6 V2 DVC sub and i am going to power it with a RF P400.2 punch series amp. Should i go with a 4 ohm or 2 ohm sub? I was also wondering if there is anyone out there that can make an enclosure specific to the needs of a 10" JL audio W6 DVC?

08-23-2007, 12:15 PM
many here can make a nice enclosure for you. I would recomend fisher customs.

08-23-2007, 01:03 PM
dont' the dub 6's only come dual 3? i could be wrong. i would suggest building your own box, save lots of money, and you will have done it your self:) if you need a design pm me.

08-23-2007, 01:44 PM
the W7 are Dual 3. the W6 come 2 or 4 ohm DVC

08-23-2007, 01:52 PM
Thanks Rob.

Yes, I would be willing to build the box for you. Let me know if you have any questions.

08-23-2007, 02:10 PM
PM sent bjfish11

08-23-2007, 11:13 PM
the W7 are Dual 3. the W6 come 2 or 4 ohm DVC

I think you may be wrong on the coil configs
8w7, 10w7, 12w7 are single 3
13w7 dual 1.5

All W6V2's are dual 4's

I could be wrong but that's all I could find at several sites including JL's website!!!

08-24-2007, 11:18 PM
you are right. i was wrong. i'm sorry, i should of did some research before posting, Noob mistake, sorry guys.

Oh, I finally made up my mind. I am going with the 10" w6v2 D4 sub, I drive a little honda civic coupe 04 and i think it will be plenty for me to start with. thanks for all the helpful feedback.