PDA

View Full Version : Can SomeOne Design Me An Enclosure?



Orion Man
08-21-2007, 09:22 PM
Hey guys, I want to build myself a nice ported enclosure. Polk wouldn't give me any hard specs on the ported enclosure reccommedations for my subs, but they told me that 1.25 per sub is reccommended. Could someone design me a slot ported enclosure for my 2 10" Polk subs. I have the reccommended sealed enclosure specs that I posted below, but don't know if they'll do any good. I want it to go low but still beable to go loud.

Theile/Small Parameters
Recommended Enclosure Sealed / Ported / Bandpass
Resonant Frequency 35 Hz
Qms 13.77
Qes .5
Qts .48
Vas 1.083 cu.ft. / 30.67 L
Bl 14 Tesla Meters
Sd 57.72 sq.in. / 353 sq.cm.
Xmax (linear) .35 in. / 9 mm
Xmax (mechanical) .71 in. / 18 mm
Le 2.56 mH

scplayboy00
08-21-2007, 09:24 PM
Go to re.com and build a box.

Orion Man
08-21-2007, 09:33 PM
How will I know if it'll be the correct design for my application? And not just something they reccommend?