PDA

View Full Version : Cut sheet



phantom240
08-17-2007, 12:21 AM
Does this cut sheet look right? I'm using 3 3/4" MDF handypanels (1/4 sheet a piece)
http://i5.photobucket.com/albums/y152/phantom240/CutSheet.jpg
The two ports come together to make the slot port.

bigbang
08-18-2007, 08:13 AM
If the external dimensions are 30 x 14 x12 and the port opening is 2 x 10.5 on both ends, then it adds up right.

bigbang
08-18-2007, 08:19 AM
If the external dimensions are 30 x 14 x12 and the port opening is 2 x 10.5 on both ends, then it adds up right.

phantom240
08-18-2007, 11:32 AM
I had to adjust the long side of the port to accomodate the material thickness of the front and back of the box.