Cut sheet

[phantom240]

Does this cut sheet look right? I'm using 3 3/4" MDF handypanels (1/4 sheet a piece)
http://i5.photobucket.com/albums/y152/phantom240/CutSheet.jpg
The two ports come together to make the slot port.

[bigbang]

If the external dimensions are 30 x 14 x12 and the port opening is 2 x 10.5 on both ends, then it adds up right.

[bigbang]

If the external dimensions are 30 x 14 x12 and the port opening is 2 x 10.5 on both ends, then it adds up right.

[phantom240]

I had to adjust the long side of the port to accomodate the material thickness of the front and back of the box.