PDA

View Full Version : smaller ported enclosure= lose outpout ??



elkiko2004
08-14-2007, 08:18 PM
i have my 2 mtx 9515ss, first at 6.8 cubes at 28 hz it slam !!! then at 7.7 cubes at 30 hz hit a lot harder !!

know i want to do a box at 6 ubes at 35 hz !!

will i loose some outpout for goin on a smaller box ??

elkiko2004
08-14-2007, 08:58 PM
common need some help here....

:)

ebrunn
08-14-2007, 09:08 PM
less air to move= less output

All depends on the specs of your sub though

elkiko2004
08-14-2007, 09:26 PM
less air to move= less output

All depends on the specs of your sub though

well im runnin two mtx 9515's with a mmats 3500.1...

mazdakid
08-14-2007, 10:19 PM
no, it should be louder. but it wont play as low as good

elkiko2004
08-14-2007, 10:30 PM
so you are sayin that to gel low you need more cubes ??...

how important is the size of the box ??

mazdakid
08-14-2007, 11:31 PM
tuning lower will make it get lower.
a bigger box would help the lowend

Lakota
08-15-2007, 02:04 AM
Usually a smaller box is better for spl.

elkiko2004
08-15-2007, 02:39 PM
Usually a smaller box is better for spl.

well im not tryin to get on some competence or using tones...

im talkin of a street system...

so what you guys think...

with mi current box is 7.4 cubes tuned to 30 hz...it gets loud, but not that loud..

so im planin on doin a box at around 35 hz....

but my space trunk doesnt let me do a box biger than 6.5 cubes at 35 hz with 105 in of port area...

so what you think, it would get louder than mi current box ??

innsanes
08-15-2007, 02:50 PM
6.5 cubes at 35 hz will be louder and more towards SQL, just make sure you don't get port chuffle and your good