PDA

View Full Version : WhiteIce's fartbox build...56k....go hunt some shrooms or sumpin'



bonesninja
08-13-2007, 08:50 PM
Ok here is a nearly complete fartbox built for WhiteIce.......3.5^3@40 htz 160^2 in port. The only other things i have to do is cut the hole..i'll wait til his sub comes in..and i need to double up the outer port wall...and possibly the top baffle. Simply put....i ran out of MDF. It took my slightly under 4 hours including cutting the wood with my circular saw.

Anyways....enjoy

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01926.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01927.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01928.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01929.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01930.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01931.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01932.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01933.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01934.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01935.jpg

bonesninja
08-13-2007, 08:51 PM
http://i198.photobucket.com/albums/aa108/bonesninja/DSC01937.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01936.jpg

http://i198.photobucket.com/albums/aa108/bonesninja/DSC01938.jpg

D3r3k
08-13-2007, 08:52 PM
real nice

jonnybusa
08-13-2007, 08:54 PM
............looks great........I wanna see the finished product........

NeverEnuffBass
08-13-2007, 08:57 PM
Thats a big-*** port

EnvEe 02
08-13-2007, 08:57 PM
thats a big ol port

bonesninja
08-13-2007, 08:58 PM
............looks great........I wanna see the finished product........

his sub should be here next week.....i think he's gonna leave it plain MDF.(he thinks its ****).....18" sub MT,DD (i'm not sure) on a Memphis 4kw

andytb
08-13-2007, 09:02 PM
thats a good box

Twistid
08-13-2007, 09:04 PM
4 hours? did you stop to read a book half way through?

bonesninja
08-13-2007, 09:08 PM
4 hours? did you stop to read a book half way through?

no...i went to dairy queen and got a foot long coney with nacho cheese and a moolatte

W8 a minute
08-13-2007, 10:02 PM
moolatte's rock.

bonesninja
08-13-2007, 10:02 PM
too bad White is on his way to Hooters in Ft Wayne...he hasn't seen this yet

WhiteIce
08-14-2007, 01:42 AM
:yumyum: box is straight ****. Very nice work Jason

BassAce
08-14-2007, 03:58 AM
I have the same phone as you.

Rictamilk
08-14-2007, 04:01 AM
Nice box.

audioholic
08-14-2007, 04:19 AM
Why did you double wall the port?

bonesninja
08-14-2007, 07:04 AM
Why did you double wall the port?

the design i had called for 1.5" thick material, so i left the internal dimensions all the same so it came out to the specs as designed, then i just used .75 MDF. eventually i will double the outer port wall and probably the top side as thats where the sub will be mounted. I would have did it all at once but i ran out of wood.

15nissen
08-14-2007, 01:13 PM
dont get me wrong its a well built box, but leaves much to be desired. No corners

are rounded, nothing is smoothed out ex. resin , pvc etc.... its not going to be as loud

as it should as it sits.:confused:

bonesninja
08-14-2007, 03:32 PM
dont get me wrong its a well built box, but leaves much to be desired. No corners

are rounded, nothing is smoothed out ex. resin , pvc etc.... its not going to be as loud

as it should as it sits.:confused:

thanx for the comments.....i wish i had more knowledge of spl designs and whatnot. Howevere that has never really been my cup of tea but i jumped at the chance to build the box for him. If he would have contracted a local shop to do it....woulda cost him 250-300+ but since i work with his dad and he's a cool kid, it only cost him materials and $20.

i certain wish i could build him the ultimate spl box but i just don't have the knowledge for that.

15nissen
08-14-2007, 04:50 PM
thanx for the comments.....i wish i had more knowledge of spl designs and whatnot. Howevere that has never really been my cup of tea but i jumped at the chance to build the box for him. If he would have contracted a local shop to do it....woulda cost him 250-300+ but since i work with his dad and he's a cool kid, it only cost him materials and $20.

i certain wish i could build him the ultimate spl box but i just don't have the knowledge for that.

There are some really simple things that really will make the box shine. Round the port edges and smooth out air flow as much as possible, buy some thin wall pvc pipe, splice it in 3rds and use that on box corners. Its simple to do and makes a difference. The cuts and the box itsself looks fantastic, dont get me wrong. :)

bonesninja
08-14-2007, 08:26 PM
There are some really simple things that really will make the box shine. Round the port edges and smooth out air flow as much as possible, buy some thin wall pvc pipe, splice it in 3rds and use that on box corners. Its simple to do and makes a difference. The cuts and the box itsself looks fantastic, dont get me wrong. :)

appreciate the advice man....i see many more of these type of boxes in the future. i learn more every single time i build a box. I do know that i'll be building a specially designed cutting table to use in the future...man handling full sheets by yourself to cut with circular saw ***** ***.

aj200415
08-15-2007, 12:33 AM
There are some really simple things that really will make the box shine. Round the port edges and smooth out air flow as much as possible, buy some thin wall pvc pipe, splice it in 3rds and use that on box corners. Its simple to do and makes a difference. The cuts and the box itsself looks fantastic, dont get me wrong. :)



hey, can you pm me more on this? how will it will help and what to do and all? thanx.

skadude016
08-29-2007, 01:05 AM
hey, can you pm me more on this? how will it will help and what to do and all? thanx.

More db's :D

IgnoreMe
08-29-2007, 01:38 AM
nice build...but where is the shroom hunting?

twisztdauthorit
08-29-2007, 01:46 AM
There are some really simple things that really will make the box shine. Round the port edges and smooth out air flow as much as possible, buy some thin wall pvc pipe, splice it in 3rds and use that on box corners. Its simple to do and makes a difference. The cuts and the box itsself looks fantastic, dont get me wrong.


PVC Eh??

iagrdshaka
08-29-2007, 04:34 AM
PVC Eh??

to round the corners

Pouring resin into the corners and letting it sit for a while works really good also. I wouldn't of double layered the box though. It won't be as loud.

icweiner
08-29-2007, 11:59 PM
to round the corners

Pouring resin into the corners and letting it sit for a while works really good also. I wouldn't of double layered the box though. It won't be as loud.

why wont it be as loud?