PDA

View Full Version : help on mustang l7 box



beatinthablock
08-12-2007, 07:44 PM
can some one help me.. i need to know if this can go in a trunk of a mustang here are the dimensions.would it be good

Dimensions (W x H x D): 34.25" x 14.5" x 16.25"
Port Tuned @ 38Hz

beatinthablock
08-12-2007, 07:46 PM
and 12's are going in the box

AlpineUser
08-12-2007, 11:37 PM
is it going in a new mustang or old cause if it is like a 92-2005 it wont fit like that....max height would be 12 then....those cars are *****es to work with

UCF52
08-13-2007, 09:20 AM
is it going in a new mustang or old cause if it is like a 92-2005 it wont fit like that....max height would be 12 then....those cars are *****es to work with

max height is 12" unless you remove the mach 460 box under the rear deck and then with the rear seat removed bend the metal along the top. i have been able to squeeze a box with a height of 14.5 in the trunk

... and yes they are a pain to work with

beatinthablock
08-13-2007, 10:10 PM
max height is 12" unless you remove the mach 460 box under the rear deck and then with the rear seat removed bend the metal along the top. i have been able to squeeze a box with a height of 14.5 in the trunk

... and yes they are a pain to work with
so i can get the box to fit if it's 14.5 like the dimensions i posted?
ok

synikalt
08-13-2007, 10:20 PM
My mustang didnt have mach system, so no amps underneath..i was going to do 14'' but i measured and max hieght was too small..so i cut down to 13 and 1/4'' and even that was a tad bit too big..i had to hammer in the border a little to slide it through cause i had a bump in the trunk! max height i wouldnt suggest going over 13'' ! 12 to be safe!

and yea...these cars a ***** to work with! i have no trunk space!

sxkicker89
08-13-2007, 10:20 PM
i would say go with 2 10 l7 thats wat im doin in ported box

beatinthablock
08-14-2007, 01:40 AM
My mustang didnt have mach system, so no amps underneath..i was going to do 14'' but i measured and max hieght was too small..so i cut down to 13 and 1/4'' and even that was a tad bit too big..i had to hammer in the border a little to slide it through cause i had a bump in the trunk! max height i wouldnt suggest going over 13'' ! 12 to be safe!

and yea...these cars a ***** to work with! i have no trunk space!

its an 02 mustang .. but how bout if i hammer that bump ?

wesl56
08-14-2007, 01:43 AM
yeah u gotta hammer that bump.... lawl

billabongcr
08-14-2007, 01:48 AM
build the box inside the trunk

beatinthablock
08-14-2007, 01:56 AM
cool well im going to try it and if it dosent fit still o well...

UCF52
08-14-2007, 09:59 AM
just make sure you flatten that bump and bang the metal that runs along the top up and 14.5"H should slide right through

synikalt
08-27-2007, 05:46 AM
no..lol dont bang that bump...i didnt know what it was so i didnt touch it lol

sxkicker89
08-27-2007, 11:39 AM
he might be talkin about the plastic piece that holds the mach ams and speakers.im goin with 1 15 l7 in the.

wesl56
08-27-2007, 02:29 PM
no, its a bump on the floorpan

regal8r
08-27-2007, 02:31 PM
coupe mustangs are a nightmare to work with in general...

UCF52
08-27-2007, 07:40 PM
coupe mustangs are a nightmare to work with in general...

agreed!