PDA

View Full Version : Build Log 12 cu. ft. @ 31hz



Random1010
08-07-2007, 05:33 PM
Starting my build log for the box for my Mach5 MJ-18"s
It'll be between 12 and 13 cu ft. tuned to 31 hz with a kerfed port.
so far ive gotten 2 36"x5/8" threaded steel rod and washers, liquid nails, silicone sealant and 2 sheets of mdf. pics soon.

dragnix
08-07-2007, 05:38 PM
pics now!!!!

Random1010
08-07-2007, 05:58 PM
http://img2.putfile.com/thumb/8/21817590540.jpg (http://www.putfile.com/pic.php?img=6236789)
http://img2.putfile.com/thumb/8/21817590673.jpg (http://www.putfile.com/pic.php?img=6236790)
http://img2.putfile.com/thumb/8/21817590540.jpg (http://www.putfile.com/pic.php?img=6236789)
MDF is in my car...build starts friday

Skip01
08-07-2007, 06:35 PM
Lovely another thread before they start building.....greatttt

jmanpc
08-07-2007, 06:36 PM
kerfing ftw

mobeious
08-07-2007, 07:11 PM
dont know if MJ's are going to need all thread and dont think they are going to take that earthquake 5000

Random1010
08-07-2007, 08:53 PM
the thread was $10...so why not. and running at 4 ohm the earthquake puts out 1500. so 750 each...theyll take it.

Fattony911
08-07-2007, 08:57 PM
ehh should had pics to put up :(

mlstrass
08-07-2007, 09:35 PM
I would do a few window braces in a box that big....

baseballer1100
08-07-2007, 09:39 PM
Why not wood glue?

tapout
08-07-2007, 09:40 PM
Lovely another thread before they start building.....greatttt

I've never understood the "coming soon threads"

Immacomputer
08-07-2007, 10:10 PM
Use wood glue (like titebond II or III) for the joints and use the liquid nails in the kerf slots. Please don't use the liquid nails for the joints -- it's no where near as strong.

Random1010
08-07-2007, 11:55 PM
i started the thread because i had time today and ill be busy and away from a computer until monday. **** people need to chill