View Full Version : Screwing the sub
08-06-2007, 09:50 PM
Should I use any special Screws to screw down my sub to the box or should i just use plain wood screws?
08-06-2007, 09:57 PM
hahaaha i like the thread title
08-06-2007, 09:58 PM
I need a bigger pole vent.
08-06-2007, 10:01 PM
lol ok im glad you like the title, but do wish to offer any advice?
08-07-2007, 12:36 AM
o ya...haha sorry im still laughing hours later. umm ive just used screws i have lying around. probably wood screws but i dont remember
08-07-2007, 12:43 AM
T-Nuts are a good solution
08-07-2007, 12:52 AM
x2 on the t-nuts.
08-07-2007, 01:03 AM
use some number 8s
08-07-2007, 01:51 AM
Pan headed wood screws are fine if you don't plan on removing and remounting the sub too often. If you want a more heavy duty mount or if your threads are stripping too easily then try T-nuts with machine screws. #8 or #10 depending on the mounting holes.
08-07-2007, 10:04 PM
I didnt know what T nuts were so i googled them and it looks like that will be some thing i want to do. So to use them I just drill a hole the same size as the shaft:naughty: put the t nut on the bottom and Then Insert:naughty: the machine screws from the top?
08-08-2007, 02:45 PM
Before you put in the sub, predrill all the holes then put the screws in, push them all the way down, then thread the T-nuts from the back and tighten the screws just enough so they begin to bite into the wood. Then you can remove all the screws and mount your sub and tighten them all the way.
08-08-2007, 06:57 PM
X eleventy billionz on teh t-nuts. Especially if you want to try diff subs in the enclosure. Wood screws eventually strip the sockets they make when they go in and out a few times. T-nuts are fo eva.
08-08-2007, 09:29 PM
OK well i put the Tee nuts in and omg took me forever to get them started. they kept on falling out when i would start to screw the bolts in, but i won in the end!
08-08-2007, 09:32 PM
I prefer to start slow then go faster as you get into it.
08-08-2007, 09:37 PM
08-08-2007, 11:28 PM
thats weird but anyways how do u put t-nuts in i want to do this and ditch my tamper proof screws considering i found out that u can buy the whole tamper proof bit set at harbor freight for like 10 bucks but i dont think the bit set says tamper proof but they do have all the bits tamper proof offers can someone link me a how to for the t-nuts?
08-08-2007, 11:36 PM
LMFAO!!!!!! that is the funniest thing car audio wise i have ever seen :laugh: