PDA

View Full Version : question on box tuning and RE box builder



hazardous0388
07-09-2007, 03:02 AM
No im trying to tune a box for a fully loaded btl 15, lookin at 4.5 cu ft after displacements @ 45-48 hz, mainly for SPL. now im having a problem with the RE Box builder. Im attempting to build a box with these specs:::

Width 33
Height 17.5
Depth 21.5


i want the port width to be 5 inches, yet it wont let me change the port length 1, or how long the port goes in, thus keeping the tuning low. Is there a way that someone could give me a certain amount of port area for this sub to be tuned at 45 hz? Thanks
Dustin

SHiZNiLTi
07-09-2007, 03:20 AM
Do all the cuts as they have listed, but when making the cut for the port make it 13.5" x 16" instead of 15.75" x 16" and that will get you close to the 45-48hz tuning that your looking for.