PDA

View Full Version : Design Help



Freelander
07-08-2007, 06:11 PM
I'm trying to think of how to build my box for my freelander. I was thinking of doing the box with an angled front with the port on the bottom. How hard will this be to accurately calculate air space and tuning? Could anyone do me up some designs so I can get some ideas?

The box is going to be for a single FI Q 12" and I would like it 2.5ft^3 tuned around 32hz.

Here are the deminsions I have to work with, I'd like the box to be as narrow as possible so I still have some cargo space. Working deminsions are 38 1/2" wide, 27" deep and 20"tall.

http://img512.imageshack.us/img512/3928/dsc00015zp7.jpg

Freelander
07-09-2007, 02:45 PM
anyone?

Freelander
07-10-2007, 02:17 AM
**** I guess no one wants to help me?

mlstrass
07-10-2007, 02:28 AM
Use this to figure your box out. Wedge 2 style and height 1 is the bottom. Port won't be on the angled face, so no biggie.

http://www.the12volt.com/caraudio/boxcalcs.asp#wed2

Freelander
07-10-2007, 02:31 AM
well that will help me a little bit but I was more or less looking for some design help. I've never built a ported box and really don't know where to start. Even after reading about it I'm sure I'd mess it up somehow.

Peaks
07-10-2007, 09:15 PM
PM Ionsql he maybe able to help you out