PDA

View Full Version : Accelevision In-Dash LCDs



Heresy
02-26-2003, 11:30 AM
To make it short, I need to know where the wires are supposed to go in the 16-pin wiring harness. I have the wires and I have the harness but they aren't together so does anyone own anyone of the Accelevision LCD in-Dash HUs?

eengrms
02-28-2003, 03:20 PM
Have you checked the manufacturer's website for wiring diagrams? Your standard colors probably still apply, if it is a standard hu:

Yellow - Battery
Red - Ignition
Black - Ground
Orange - Factory Dim (Usually is not used)
Blue - Antenna
Blue/White - Remote Amp turnon
White - Front Left (-)
White/Black - Front Left (+)
Gray - Front Right (-)
Gray/Black - Front Right (+)
Green - Rear Left (-)
Green/Black - Rear Left (+)
Purple - Rear Right (-)
Purple/Black - Rear Right (+)
RCA's - Should be labeled. There should be a couple amp outs, a video in, an audio in, possibly an audio out. There may even be a changer or aux in.

Let me know if there are any other colors that you are unsure of.

Heresy
03-01-2003, 03:38 AM
The problem is that I have no idea where the wires go in the harness because there aren't any wires in the harness. I need to know where the wires are placed in the harness; I can easily distinguish the colors.