PDA

View Full Version : 9510G Box Design - Help Needed



SeanDub
07-02-2007, 11:54 PM
So I just bought a DD 9510G and I now I need a box for it. I want it to hit the lows and be loud, like just about everyone. I was thinking 1.75 cubes net tuned to 35 hertz. But have no idea how much port area to use with a ten. The only other box I have designed was for my 9917 and it has over 100 square inches of port. So I was thinking around 50 square inches of port - what do you think?

Also, if you want to throw me out a design or some other options as far as size, tuning, and port area, go ahead

Also, if you've ever worked with a 9510, help me out man.

Thanks.

Qbenjamin
07-02-2007, 11:56 PM
PM IonSQL.

J31Rob
07-02-2007, 11:59 PM
I've got GREAT design for these subs.. hit me up.. :)

Louisiana_CRX
07-03-2007, 12:00 AM
Is this for daily...competition or what?

fwb_1234
07-03-2007, 12:20 AM
daily. i'll answer for him. I'm sure that he'll want an spl version too though.

J31Rob
07-03-2007, 12:21 AM
Is this for daily...competition or what?

35 hz.. sounds daily.

Louisiana_CRX
07-03-2007, 12:26 AM
With my 9510 in My Saleen tuned low for daily...and it sounds awesome I did a 143.1 SB1 average...on 2 DD M1's strapped at 2 ohm mono

SeanDub
07-04-2007, 07:13 PM
Well I designed 2 boxes:

A) 1.95 net, 52.5 square inches of port, and tuned to 38hz

B) 1.97 net, 47.25 square inches of port, and tuned to 36hz

I'm thinking B, but I was thinking about going with A to try out the slightly higher tuning and more port area.

Opinions/advice/questions?

massiveaudiocw
07-04-2007, 07:25 PM
i would do like 1.5 cubes @ 40hz w/ 24" of port

SeanDub
07-04-2007, 07:29 PM
alright, I'll try and create a design that'll do that. There are some problems trying to get it that small because of how I want it to fit in my car, but I'll sacrifice for the good of the box i guess. haha

SeanDub
07-04-2007, 09:42 PM
Okay, I designed a 1.53 net cube box tuned to 39.61 hz with 30 square inches of port.

Sound right to everyone?

SeanDub
07-06-2007, 08:43 PM
Okay, new idea - 1.53 cubes, 39.62 hz, 30 square inches of port.

Designed in SketchUp; what do you think? Any problems?

http://img512.imageshack.us/img512/1999/9510gboxavy5.jpg (http://imageshack.us)

http://img59.imageshack.us/img59/3994/9510gboxbaq1.jpg (http://imageshack.us)

http://img526.imageshack.us/img526/5198/9510gboxcjc2.jpg (http://imageshack.us)

http://img154.imageshack.us/img154/4104/9510gboxdvi7.jpg (http://imageshack.us)

hemiscott
07-19-2007, 01:19 PM
How did this work out for you ? I am thinking of going this route.. What vehicle ? Thx

djman37
07-19-2007, 01:28 PM
DD's specs for 10's
1.25^ft (1) 8" or (1) 10" 20.0 sq" vent x 17" long tunes to 40Hz
1.50^ft (2) 8" or (1) 10" 24.0 sq" vent x 16" long tunes to 40Hz

jani's calc(i think)
www.soundpressure.com sample box calc in the middle right at the top.

I'd rather use bracing than triple baffle for support....that's got to be HEAVY.

hemiscott
07-19-2007, 01:36 PM
Ya, i just want to see how happy he is with it.. If i do go this route (as in getting a 9510g) I will use a double baffle... I'm just trying to find something smaller than a 15" that will bump loud, daily. Thx

Wkbdkid
07-20-2007, 12:15 PM
**** Triple Baffle?

80INCHES
07-20-2007, 12:23 PM
if u want to hit the lows nice...do 1.5 cubes tuned to 32hz u will be good right there


80