View Full Version : 9510G Box Design - Help Needed

07-03-2007, 12:54 AM
So I just bought a DD 9510G and I now I need a box for it. I want it to hit the lows and be loud, like just about everyone. I was thinking 1.75 cubes net tuned to 35 hertz. But have no idea how much port area to use with a ten. The only other box I have designed was for my 9917 and it has over 100 square inches of port. So I was thinking around 50 square inches of port - what do you think?

Also, if you want to throw me out a design or some other options as far as size, tuning, and port area, go ahead

Also, if you've ever worked with a 9510, help me out man.


07-03-2007, 12:56 AM

07-03-2007, 12:59 AM
I've got GREAT design for these subs.. hit me up.. :)

07-03-2007, 01:00 AM
Is this for daily...competition or what?

07-03-2007, 01:20 AM
daily. i'll answer for him. I'm sure that he'll want an spl version too though.

07-03-2007, 01:21 AM
Is this for daily...competition or what?

35 hz.. sounds daily.

07-03-2007, 01:26 AM
With my 9510 in My Saleen tuned low for daily...and it sounds awesome I did a 143.1 SB1 average...on 2 DD M1's strapped at 2 ohm mono

07-04-2007, 08:13 PM
Well I designed 2 boxes:

A) 1.95 net, 52.5 square inches of port, and tuned to 38hz

B) 1.97 net, 47.25 square inches of port, and tuned to 36hz

I'm thinking B, but I was thinking about going with A to try out the slightly higher tuning and more port area.


07-04-2007, 08:25 PM
i would do like 1.5 cubes @ 40hz w/ 24" of port

07-04-2007, 08:29 PM
alright, I'll try and create a design that'll do that. There are some problems trying to get it that small because of how I want it to fit in my car, but I'll sacrifice for the good of the box i guess. haha

07-04-2007, 10:42 PM
Okay, I designed a 1.53 net cube box tuned to 39.61 hz with 30 square inches of port.

Sound right to everyone?

07-06-2007, 09:43 PM
Okay, new idea - 1.53 cubes, 39.62 hz, 30 square inches of port.

Designed in SketchUp; what do you think? Any problems?

http://img512.imageshack.us/img512/1999/9510gboxavy5.jpg (http://imageshack.us)

http://img59.imageshack.us/img59/3994/9510gboxbaq1.jpg (http://imageshack.us)

http://img526.imageshack.us/img526/5198/9510gboxcjc2.jpg (http://imageshack.us)

http://img154.imageshack.us/img154/4104/9510gboxdvi7.jpg (http://imageshack.us)

07-19-2007, 02:19 PM
How did this work out for you ? I am thinking of going this route.. What vehicle ? Thx

07-19-2007, 02:28 PM
DD's specs for 10's
1.25^ft (1) 8" or (1) 10" 20.0 sq" vent x 17" long tunes to 40Hz
1.50^ft (2) 8" or (1) 10" 24.0 sq" vent x 16" long tunes to 40Hz

jani's calc(i think)
www.soundpressure.com sample box calc in the middle right at the top.

I'd rather use bracing than triple baffle for support....that's got to be HEAVY.

07-19-2007, 02:36 PM
Ya, i just want to see how happy he is with it.. If i do go this route (as in getting a 9510g) I will use a double baffle... I'm just trying to find something smaller than a 15" that will bump loud, daily. Thx

07-20-2007, 01:15 PM
**** Triple Baffle?

07-20-2007, 01:23 PM
if u want to hit the lows nice...do 1.5 cubes tuned to 32hz u will be good right there