View Full Version : 36" Inches of Subwoofer Diameter FTW!
05-22-2007, 12:33 AM
Now, Help me make it loud.
The Subs: Mach5 MJ-18 8 ohm version
I was thinking 10 cu. ft at 35 hz, based on WinISD, that would give me 4 4" PVC, cut 8 inches long a piece
However, I'm sure there are more experts here than me, what do you guys think would be optimum for pure SPL outta these babies?
05-22-2007, 12:34 AM
lemmee know some #s when you get it done.. I think imma do a new setup sometime... maybe 4 MAW15's sealed lol
05-22-2007, 12:36 AM
sounds good to me
05-22-2007, 12:41 AM
be sure you factor in all your displacements
05-22-2007, 04:41 PM
Port area seems rather low?
05-22-2007, 04:44 PM
ahhh let me know what you think...im considering doing 2 MJ18's
05-22-2007, 10:11 PM
Just Got SketchUp, decided to design the box for the two MJ-18s from Mach5
This is a final production image, with the top and front being red tinted plexiglass, the sides being 1" MDF, painted maroon
Ports are 4" x 8" firing toward the cabin, hopefully clear PVC at the end.
05-23-2007, 12:26 AM
05-23-2007, 12:33 AM
that plexi is gonna have to be *** loads thick.. and a buuuunnnchh of money
prices on 1" clear plexigalss acrylic sheets
looks sweet though