$4.xx for best ported box design

[pitbull12888]

Seen the other thread with people making him box designs. I got the same thing. About $4.70 in my paypal ill give to ya. Needs to be for 2 12" . Ported and tuned to 33-35 hz. Dimensions can be 39" wide,
15" high, and and depth of 15" .Will be housing 2 Audiobahn Alum q's (for my friend). Heres the subs info.

As i said (2) 12"s

http://i98.photobucket.com/albums/l245/badassredneck06/soundqspecs07.jpg

[billy18bm]

has to be taller u can hardly fit 12's in there if the boxis only tweleve...

[billabongcr]

has to be taller u can hardly fit 12's in there if the boxis only tweleve...

maybe hes not mounting on the 12

[pitbull12888]

has to be taller u can hardly fit 12's in there if the boxis only tweleve...

mounting diameter is only like 5 5/8 " ? y not?

I think you missed the upfiring part. Meaning subs on top of the box facing up.

[billy18bm]

yep lol **** i was done too

[billy18bm]

if its goin in a trunk it will sound like ****...face em out towards the back of the trunk sounds amazing in a car..

[pitbull12888]

Ok see how it comes out with 15" high, 39" wide, and 15" depth.

[Thieroff]

NVM, I'm an idiot


CT

[billabongcr]

if its goin in a trunk it will sound like ****...face em out towards the back of the trunk sounds amazing in a car..

...

[60ndown]

to do the calculations correctly for a good ported box will take someone some time,


time = money

$5 is not enough imo.

i paid $40 for a design recently, the guy took nto acount my sub, max dimensions, power available, vehicle box was going into, and sq/spl % preference.


needless to say the box is exactly what i wanted, and performs better than i could have imagined.

i would pay the same guy $40 in a heartbeat for aother design if and when i need it.

if anything is off in the design process, your bass will be cr@p until you get another box.

[billabongcr]

to do the calculations correctly for a good ported box will take someone some time,


time = money

$5 is not enough imo.

i paid $40 for a design recently, the guy took nto acount my sub, max dimensions, power available, vehicle box was going into, and sq/spl % preference.


needless to say the box is exactly what i wanted, and performs better than i could have imagined.

i would pay the same guy $40 in a heartbeat for aother design if and when i need it.

if anything is off in the design process, your bass will be cr@p until you get another box.

http://i11.photobucket.com/albums/a189/billabongcr/equation.jpg

[pitbull12888]

to do the calculations correctly for a good ported box will take someone some time,


time = money

$5 is not enough imo.

i paid $40 for a design recently, the guy took nto acount my sub, max dimensions, power available, vehicle box was going into, and sq/spl % preference.


needless to say the box is exactly what i wanted, and performs better than i could have imagined.

i would pay the same guy $40 in a heartbeat for aother design if and when i need it.

if anything is off in the design process, your bass will be cr@p until you get another box.


im just lookin for a basic box design. I got a buddy on here who will help for free. Just figured i would do this to see if anyone wanted to throw in some extra ideas.

[60ndown]

im just lookin for a basic box design. I got a buddy on here who will help for free. Just figured i would do this to see if anyone wanted to throw in some extra ideas.
if your going to build a box, you mght as well build the best box you can.

[billy18bm]

http://home.comcast.net/~tshot39/boxie2.jpg

[pitbull12888]

http://home.comcast.net/~tshot39/boxie2.jpg

Thanks. If nobody else feels like making one ill send ya the money tomorrow.

[jellyfish420]

to do the calculations correctly for a good ported box will take someone some time,


time = money

$5 is not enough imo.

i paid $40 for a design recently, the guy took nto acount my sub, max dimensions, power available, vehicle box was going into, and sq/spl % preference.


needless to say the box is exactly what i wanted, and performs better than i could have imagined.

i would pay the same guy $40 in a heartbeat for aother design if and when i need it.

if anything is off in the design process, your bass will be cr@p until you get another box.

x2
i paid $35 for the design of my series parallel bandpass. he took into account for the subs, power, what i wanted it to do, and everything. all the equiptment i've got, and that was the best money i've ever spent on my system, and i would easily pay double for a design from the same person...we might even be talking about the same person, mind telling who it is. i got mine from hexibass from team toxic bass.

[oglejust]

**** wish i woulda saw this earlier... i could use the $

[BrianChia]

Here's one...

http://img145.imageshack.us/img145/8954/dualport2xb7.png

Cut sheet:

http://img247.imageshack.us/img247/97/dualportcs2my0.png

[oglejust]

^^^^^^^^ wow... give that man 10 bux even did the mdf pic lol

[Blove1991]

lol, I would space it out a bit due to blade width

[pitbull12888]

Here's one...

http://img145.imageshack.us/img145/8954/dualport2xb7.png

Cut sheet:

http://img247.imageshack.us/img247/97/dualportcs2my0.png

nice. Pm me your paypal.

[pitbull12888]

lol, I would space it out a bit due to blade width

You dont need to if you cut on the waste side of the line.

[BrianChia]

There should be enough margin to compensate for kerf width. You don't draw all the lines on at once, you measure each section after each rip or cut.

[billy18bm]

the ports are awfully close to the wall

[theCybe]

same as the port width, they're where they are supposed to be.

Price should go up for that.

[pitbull12888]

payment sent.