PDA

View Full Version : NEED CUTSHEET FOR 2 12'' Fi SSD's



SethPhillips
05-11-2007, 01:46 AM
i have a mtx81000d that will be running 2 12'' Fi SSD'S
its for in a 95 dodge spirit.
i listen to rap, hip hop, r&b. and a little 80's

can someone get me a cut sheet for a ported box for these bad boys.??
thanks

johnson
05-11-2007, 10:43 AM
need a design first?

SethPhillips
05-11-2007, 11:38 AM
ok?

SethPhillips
05-11-2007, 03:00 PM
like trunk dementions??

Johnny Drama
05-11-2007, 03:05 PM
Give me your max specs and I will give you a box plan.

SethPhillips
05-11-2007, 03:14 PM
trunk dimentions

52'' wide ( overall)
37'' wheel well to wheel well (wide)
15'' (tall)
28'' deep

my old box for the 4 10'' subs is seald and the dementions of that are

1 ft tall
1 ft deep
45'' wide

Johnny Drama
05-11-2007, 03:25 PM
3.5 @30hz 40sq.in. port
http://img339.imageshack.us/img339/636/35cubes30hz40sqinpp5.png (http://img339.imageshack.us/img339/636/35cubes30hz40sqinpp5.png)

3.5 @32 40sq.in.
http://img142.imageshack.us/img142/5619/35cubes32hz40sqinlh7.png (http://img142.imageshack.us/img142/5619/35cubes32hz40sqinlh7.png)

3.5 @32 45.5 port
http://img526.imageshack.us/img526/7809/35cubes32hz455sqinlq7.png (http://img526.imageshack.us/img526/7809/35cubes32hz455sqinlq7.png)

Johnny Drama
05-11-2007, 03:26 PM
I have more if you dont like any of those.

SethPhillips
05-11-2007, 03:30 PM
i cant see the pics???
i was tould to make sure the sub box is tuned to 33 hz

send ALL the info and pics to may e mail if you could...
pm me for my email
thanks man

Johnny Drama
05-11-2007, 03:32 PM
i cant see the pics???
i was tould to make sure the sub box is tuned to 33 hz

send ALL the info and pics to may e mail if you could...
pm me for my email
thanks man


are you at work or something? I can see the pics just fine.

I dont have any box designs tuned to 33hz. And I dont see any reason why the box MUST be tuned there... Honestly I can promise you that you wont be able to tell a difference between 32, 33, or 34 tuning for that matter.

jmoreno150
05-11-2007, 03:35 PM
would the 30hz box work for 2 12" fi q's?

Johnny Drama
05-11-2007, 03:39 PM
would the 30hz box work for 2 12" fi q's?

Its a little small for them. They want 1.8-2.5 cubes per 12"

What are your max specs?

SethPhillips
05-11-2007, 04:19 PM
ya im at work it wont allow me to see the pics...

you guys are more knowladgable about this so you tell me...

Blove1991
05-11-2007, 04:29 PM
Fi 12" SSD also calls for 1.8-2.5ft^3 :fyi:

I would recommend 4ft^3 NET tuned to 35hz

SethPhillips
05-11-2007, 04:36 PM
well if you could get me a cut sheet on that please

profundus-sanus
05-11-2007, 04:42 PM
would the 30hz box work for 2 12" fi q's?

volume and tuning is vehicle and musical preference dependant.

You cant just say throw it in a 3 cube box @ 38hz box when all you listen too is rap in an suv and can't say throw it in a 4.75cu ft @ 29hz box in a truck when you only listen to metal.

SethPhillips
05-11-2007, 04:51 PM
ok we are going off topic here

this is for 2 12'' fi ssd's

profundus-sanus
05-11-2007, 04:58 PM
ok we are going off topic here

this is for 2 12'' fi ssd's

it is a trunk car right?

SethPhillips
05-11-2007, 04:59 PM
its going in the trunk of a 1995 dodge spirit like a plymoth acclaim. ect....
i have the trunk dementions posted on this thread.

profundus-sanus
05-11-2007, 05:00 PM
its going in the trunk of a 1995 dodge spirit like a plymoth acclaim. ect....
i have the trunk dementions posted on this thread.

i know i saw them..
I just wasn't sure if it was the same as a shadow/duster, i know those were hatchbacks.

I'll get you a cutsheet real quick.

SethPhillips
05-11-2007, 05:06 PM
thank you sir.
my car's got a fairly decent trunk size!!
but its not a hatch for sure... i have a flat back window.

Johnny Drama
05-11-2007, 05:09 PM
I dont know where I got the specs of the SSD's I must have been looking at the 10" drivers lol...

Johnny Drama
05-11-2007, 05:12 PM
Only thing that I have close to what you have in 15" tall is below...and its still an inch too wide.

4 cubes 35hz

http://img510.imageshack.us/img510/8718/4cubes35hz50sqinxo6.png

SethPhillips
05-11-2007, 05:23 PM
well it would be nice to have them in a ported box!!!! but i do have a nice 1 cu ft seald box made out of 1'' mdf that i think will suit them very well.???

profundus-sanus
05-11-2007, 05:43 PM
loading into photobucket

PV Audio
05-11-2007, 05:44 PM
well if you could get me a cut sheet on that pleaseBro, you do realize people don't just sit down and type out numbers. It DOES take work to get what you're asking for.

SethPhillips
05-11-2007, 05:46 PM
i know this! im not asking for you guys to go out of the way for me!!!
im not demanding. im asking please...
thank you

profundus-sanus
05-11-2007, 05:47 PM
Bro, you do realize people don't just sit down and type out numbers. It DOES take work to get what you're asking for.

i agree, enclosure design is a pretty thankless job...


http://i33.photobucket.com/albums/d55/ratherbriding99/fe7dd8da.jpg

there's the box. 4 cubes net tuned to 34hz on the dot. ( i don't use thats sites calculator, just has an easy to use cutsheet)

SethPhillips
05-11-2007, 05:53 PM
well i sorry about anything i may have caused....
but thank you very mutch
is there supposed to be a picture?????
im at work it blocks all pics!!!!

tez4life
05-11-2007, 06:15 PM
well i sorry about anything i may have caused....
but thank you very mutch
is there supposed to be a picture?????
im at work it blocks all pics!!!!



I suggest you wait till you get home, and check this thread. There are some very nice designs and cutout sheets laid out by some of the forum members.

I also had a a Dodge Spirit, (96) so yea it does have a nice size trunk for its size!

SethPhillips
05-11-2007, 06:22 PM
yea i'll have to check it out when i get home..
for a small car it dose have a budunka donk on it

strong*I*bumpin
05-12-2007, 02:38 AM
Try this site,put the #'s in & the program will spit out the cuts....http://subwoofertools.com/forum/ported-box.asp

BrianChia
05-13-2007, 03:26 AM
Here you go. The net volume printed is incorrect, it's actually about 2.0 ft^3 before driver placement, but that still fits within the recommendations.

http://img214.imageshack.us/img214/6333/dualportin9.jpg

Here's a cut sheet too:

http://img214.imageshack.us/img214/3596/dualportcsqm9.jpg

-Brian

BrianChia
05-13-2007, 03:27 AM
Another view:

http://img214.imageshack.us/img214/2275/overallch6.jpg

And it all fits onto 1 sheet of 3/4" MDF too, you're lucky!

-Brian