View Full Version : Planning OUT Blow Thru (need Help)
05-10-2007, 04:34 PM
OK here the deal i have 4 cvr 12's 2 ohm and they and in a sealed box behind my seat of my single cab!!!!....Yeah i know but anyways i am planning on doing a blow thru cause its just not loud enough.
The part i need help with is the planning of the box i know roughly what i want to look like and how big just need to see something drawn out for me maybe if you could help.... I am wanting to have them ported in about 2.5^3 [email protected]
or maybe 2 chambers with [email protected]
and i want the ports to come out the middle of the box if possible like 2 ports right in the middle with 2 subs on one side and 2 subs on the other side!!!!
05-10-2007, 04:37 PM
so you want a ported box.
are those dual 2 ohm speakers.
05-10-2007, 04:40 PM
Something like This
05-10-2007, 04:42 PM
and yes they are dual 2 ohms wired 1ohm!!! I have to go to work but please all input please!
05-10-2007, 05:02 PM
how much space you got?
05-10-2007, 05:57 PM
So you want louder but are tuning 30hz?
05-11-2007, 03:34 PM
well yeah i want louder but i want good sound quality too!!! what should i tune it to???? maybe 35 or 40 i9 dont really know but i just know the higher you tune the less sound quality!? right
05-11-2007, 05:42 PM
can i get some imput anybody cmon please i was needin some ideas.....
05-12-2007, 06:15 PM
to get someone help you with something that complicated is going to take some kind of incentive.
IMO 33-35 would be good for you.
05-13-2007, 11:11 AM
ok it looks like i can made the box about 55 in wide and i can go back almost to the wheel wells if needed wasnt sure if it was but thought it would be plenty! Also i can make it about 17in tall or so let me know any imput on this also if i could get a skech of this with some porft measurements to tune it to 40Hz i will pay on paypal!!? thanks for the help!!
05-13-2007, 08:18 PM
I changed my mind. 30-33Hz (or even lower) would be better for SQ.
05-13-2007, 08:27 PM
I'll tell you what. If you explain that picture better, I might be able to help. Right now I don't understand a thing about that plexi window, or much of anything else.
Draw a new pic and put it in perspective with the truck (doodle the truck) and then I could draw you up something rough.
05-14-2007, 11:26 AM
yeah the plexiglass window is just going on the back wall facing the tailgate....just messed up that picture its just like a 20x15" plexiglass window centered on the back just right where i want the ports to come out!!
05-14-2007, 11:33 AM
anybody else understand that picture i know its bad but i cant redraw one right now i can only type on this cpu...so i can explain it more if it will help someone help me!!?