PDA

View Full Version : how hard?



Dylan
05-09-2007, 10:52 PM
how hard is it to mount 6.5" coax speakers into a 6x9 slot? I have 6x9 rear slot and these 6.5 in front.

I would like to mount them in the back and get a set of components in the front and possibly mount the tweeter in the 4x6 dash slot?

blackbonnie
05-09-2007, 11:13 PM
just get some speaker adapters and the adapters mount right to your stock locations and you aftermarket speakers will mount to those. this might help > http://www.cardomain.com/shoplist~t~Universal+Speaker+Adapters

Hintzyboy
05-09-2007, 11:33 PM
Just make your own out of MDF. Simple enough and will work better than flimsy plastic ones.

blackbonnie
05-09-2007, 11:36 PM
could also do that ^

XanderMoser
05-09-2007, 11:43 PM
If at all possible, definitely make your own from MDF. Then just make sure there is a nice seal between the MDF and the mounting location and the MDF and the speaker. Plastic adapters have a much more apparent resonance frequency and can rattle much more easily. Also usually more expensive...