View Full Version : How do you protect speakers from getting hit by water inside the doors?
05-07-2007, 08:12 PM
Water can get through on my Civic if it's raining hard enough. Is it a window seal problem or is this common on most cars?
05-07-2007, 08:13 PM
foam baffles work.
05-07-2007, 08:16 PM
I can tell ya, an inch is allowable. Working at car dealerships for around 8 years, many warranty issues came up, but an inch in the door is allowable. I thought this was retarded, but oh well. Best you can do is get new belt mldgs, inside and out, drill holes in the bottom of your door if possible.
05-07-2007, 08:21 PM
There are holes on the bottom of water to drain out but I dont want my speakers getting damaged while it's raining.
05-07-2007, 08:23 PM
put em in foam baffles. you can cut out part of the back so they don't affect the speaker's performance.
05-07-2007, 08:24 PM
05-07-2007, 08:35 PM
most factory speaker come with a baffle that covers the top half and the back of the speaker so water runs down the window and hits the baffle and drips off the back, that good enough for them
05-07-2007, 10:07 PM
hey whats the name of this thing that protect the speaker from getting wet and how does is the cost?
05-07-2007, 10:15 PM
lol, i think its pretty obvious from the pic and phone number, and the website at jmanpc's last post
05-07-2007, 11:18 PM
Does water affect deadener or ensolite?
05-08-2007, 12:34 AM
My advise...get the speakers out of the doors and into some kick pods.
I have a 3 way front stage for my current project. The mids and tweets in kicks and 8s in the doors. The 8s will be fully enclosed in a plastic custom sealed enclosure that will be mounted in the doors. Fully sealed=no possibility of water/moisture damage.
I don't care much for the foam baffles.
Hope this helps