PDA

View Full Version : F**k it....ill give it a try - T-line design, build and discussion (12 05xxx)



iamamp3pimp
05-06-2007, 11:30 PM
heres the design that ive come up with so far....

port is 127 inches long, and has 70 square inches of area.


hmmm



cutsheet

top 36.25 x 14.0
bottom 36.25 x 14.0
Side 18.0 x 14.0
Side 23.75 x 14.0
Back 37.0 x 23.75
Front 37.0 x 23.75
Port 1 14.0 x 30.5
Port 1 14.0 x 30.5
Port 1 14.0 x 30.5
Port 2 5.0 x 14.0

angles - 4.5 (6) @ 45 degrees


specs

Length - 10.6 feet (127 inches approx)

70 square inches of port.

blah blah blah

http://i35.photobucket.com/albums/d177/iamamp3pimp/00004Transmissionlinedesign.jpg
http://i35.photobucket.com/albums/d177/iamamp3pimp/00003Transmissionlinedesign.jpg
http://i35.photobucket.com/albums/d177/iamamp3pimp/00002Transmissionlinedesign.jpg
http://i35.photobucket.com/albums/d177/iamamp3pimp/00001Transmissionlinedesign.jpg


this will be tested in an 03 mazda tribute with a xxx and a kicker comp 12


btu will be built for in home use.....

Discuss

Rawr-DQ
05-06-2007, 11:39 PM
lol, lets cross our fingers that it dont burn up, not saying it will, but ya never know.

baseballer1100
05-06-2007, 11:45 PM
******.

fwb_1234
05-06-2007, 11:59 PM
why that wasted airspace just to the left of the woofer?

is it just me getting confused?

blackbonnie
05-07-2007, 12:02 AM
build it up

PV Audio
05-07-2007, 12:05 AM
About an hour ago there was a wasp in my house, buzzing around by the windom. I grabbed some newspaper, rolled it up, and swat him. He was still alive and moving so I just picked him up and threw it in the toilet. Well, about 5 minutes ago I had to poop and I forgot about the wasp. Im sitting down, pooping. A few turbs came out. Then, I felt something on my ***..kind of thought it was the water running down my cheeks from the splash of the turb. Well, it started to go towards my *******. I jumped up, and as I did so my cheeks smashed together traping the wasp inside my butt. Not a half a second after jumping up I felt the worse stinging in my life. The bastid shoved his thorn right into my soft, rose bud. Im screaming, jumping around and brushing off my anus. Its the worst pain ever. I got him off my ***, and the little ****er just flies up and into another room.
So now, im standing up at the computer. Debating if I should go get my brother so he can put some creme on my swollen rectum. It *****.

BigOso
05-07-2007, 12:09 AM
i about pissed myself laughing that **** is so ****ing funny.

bball09124
05-07-2007, 12:10 AM
About an hour ago there was a wasp in my house, buzzing around by the windom. I grabbed some newspaper, rolled it up, and swat him. He was still alive and moving so I just picked him up and threw it in the toilet. Well, about 5 minutes ago I had to poop and I forgot about the wasp. Im sitting down, pooping. A few turbs came out. Then, I felt something on my ***..kind of thought it was the water running down my cheeks from the splash of the turb. Well, it started to go towards my *******. I jumped up, and as I did so my cheeks smashed together traping the wasp inside my butt. Not a half a second after jumping up I felt the worse stinging in my life. The bastid shoved his thorn right into my soft, rose bud. Im screaming, jumping around and brushing off my anus. Its the worst pain ever. I got him off my ***, and the little ****er just flies up and into another room.
So now, im standing up at the computer. Debating if I should go get my brother so he can put some creme on my swollen rectum. It *****.

wasp: 1
you: 0

icpurplepplalot
05-07-2007, 12:10 AM
About an hour ago there was a wasp in my house, buzzing around by the windom. I grabbed some newspaper, rolled it up, and swat him. He was still alive and moving so I just picked him up and threw it in the toilet. Well, about 5 minutes ago I had to poop and I forgot about the wasp. Im sitting down, pooping. A few turbs came out. Then, I felt something on my ***..kind of thought it was the water running down my cheeks from the splash of the turb. Well, it started to go towards my *******. I jumped up, and as I did so my cheeks smashed together traping the wasp inside my butt. Not a half a second after jumping up I felt the worse stinging in my life. The bastid shoved his thorn right into my soft, rose bud. Im screaming, jumping around and brushing off my anus. Its the worst pain ever. I got him off my ***, and the little ****er just flies up and into another room.
So now, im standing up at the computer. Debating if I should go get my brother so he can put some creme on my swollen rectum. It *****.

lmfao and disgusted at the same time:laugh: :sick:

CJL
05-07-2007, 12:14 AM
PV Audio = Pwned?????


:laugh:

PV Audio
05-07-2007, 12:18 AM
That didn't happen to me, it's from OT.com. I'm just pasting it everywhere.

ngsm13
05-07-2007, 12:21 AM
I noticed that.

nG

Rawr-DQ
05-07-2007, 12:24 AM
Thread jacker ^^


why that wasted airspace just to the left of the woofer?

is it just me getting confused?

Because the port length had to be a certain size and he wanted the box to be xx inches wide and xx inches tall.

He designed it to fit in a certain spot, and to be square, versus desiging the box around very strict port size, and having some odd shape in the end...so this way is just easier to design and do the math right.

Volenti
05-07-2007, 12:58 AM
Just modeled this in mathcad with the comp 12 and it looks pretty good, solid 4db gain over sealed from 80hz down to 30hz tapering off towards 20hz, should sound pretty impressive.

Racerx250
05-07-2007, 01:02 AM
i about pissed myself laughing that **** is so ****ing funny.

x2

iamamp3pimp
05-07-2007, 03:37 AM
Just modeled this in mathcad with the comp 12 and it looks pretty good, solid 4db gain over sealed from 80hz down to 30hz tapering off towards 20hz, should sound pretty impressive.


how about the 05 xxx?


ive got a spare for a litle while

Frijoles24
05-07-2007, 03:52 AM
what program did u use to design the dimentions n shape. im thinking of making my own box too with a JL design as the port.. i posted it oin this site
..i drew that paint image of it. =P

PV Audio
05-07-2007, 08:38 AM
Sorry for threadjackin Robin :D

iamamp3pimp
05-07-2007, 11:10 AM
no biggie.

just hoping someone can model the 05xxx for me as i cant, i dont have mathcad....