PDA

View Full Version : Need Ported Box Plans Please!



SethPhillips
05-05-2007, 03:12 PM
ok i have a 95 dodge spirit. i have 4 rockford p3's im running them off a mtx 8100d

i want to put all 4 of them in a portd box

can anyone help?? or a cad design or something???
thanks

SethPhillips
05-05-2007, 05:46 PM
anyone???

Rawr-DQ
05-05-2007, 05:57 PM
Is it an R/T dodge spirit~?

SethPhillips
05-05-2007, 06:01 PM
nope just your good old 2.3 lt 4cyl

the trunk is pretty big in size.

just need to get an idea on what the box would look like, witch ay to fire them ect....'
thanks

Rawr-DQ
05-05-2007, 06:01 PM
Fire the subs to the back of the trunk...if they can't fit, you'll have to settle for firing them up.

SethPhillips
05-05-2007, 06:05 PM
id say they would have to be fireing up.

my box for the 4 tens fits lightly snug. still have a good amount of room still deffinitaly can get a big ported box in there

Rawr-DQ
05-05-2007, 06:12 PM
Here is my old ported box wih 4 12"s

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_85_full.jpg

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_93_full.jpg

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_98_full.jpg

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_99_full.jpg

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_104_full.jpg

http://memimage.cardomain.net/member_images/12/web/804000-804999/804181_110_full.jpg

oglejust
05-05-2007, 06:16 PM
build urs just like rawr-dq did

SethPhillips
05-05-2007, 06:43 PM
im at work it wont let me see the pics!!!!!

i'll have to look later

SethPhillips
05-07-2007, 11:57 AM
ok i have the specs from rockford for recomended ported enclosure
i have 4 of these p-3's i want them all in a ported box

here are the specs for one of them in a ported box
H= 14.5 W=22.5 D=10''
recommended cu ft 1.25 (35.40 L)
recommended port 3'' x 7.3''

so i need plans just like the box that was built for those 4 type r's
but only built for my subs

can someone draw up something or give me some dimentions??
thank you

SethPhillips
05-07-2007, 12:33 PM
come on now???

profundus-sanus
05-07-2007, 02:17 PM
so you really don't have max dimesnsions???

SethPhillips
05-07-2007, 03:47 PM
here are the max dem....

or my trunk space..

25'' deep at the most!!!
37'' wide (wheel well 2 wheel well)
17'' tall

Blove1991
05-07-2007, 06:55 PM
Why not sell all your rockford's and buy 2 12" Fi Q's and put in them in a 4ft^3 NET box tuned to 33hz and sit back and drool?

Instead of trying to fight and get these to fit......With those MAX dimensions with 1/2" taken off each your right at 7 cubic ft......Whats your sub displacement?

Rawr-DQ
05-07-2007, 07:44 PM
Driver Properties
Name: P310D2
Type: Standard one-way driver
Company: Rockford Fosgate Corp.
Comment: P3 Punch Stage 3 series
No. of Drivers = 4
Mounting = Standard
Wiring = Series-Parallel
Dual voice coils = separate
Fs = 27 Hz
Qms = 6.69
Vas = 0.865 cu.ft
Cms = 0.0313 in/lb
Mms = 6.67 oz
Rms = 10.74 lb/s
Xmax = 0.472 in
Sd = 48.05 sq.in
Qes = 1.08
Re = 1.7 ohms
Le = 1.8 mH
Z = 2 ohms
BL = 1.619 lb/A
Pe = 200 watts
Qts = 0.93
-----------------------------------------
Box Properties
Name:
Type: Vented Box
Shape: Prism, square
Vb = 4.927 cu.ft
Fb = 29.06 Hz
QL = 5.869
F3 = 21.95 Hz
Fill = none
No. of Vents = 1
Vent shape = rectangle
Vent ends = one flush
Hv = 12 in
Wv = 5 in
Lv = 35 in



Box outside dimensions: 24 x 36 x 17



Cut list, (you may want to try a different way) and you should double up the baffle:

Box Parts (Square Prism)
1 Top, 1 Bottom: 17 (c) x 36 (b) in
0.75 (thick) in
1 Front, 1 Back: 22.5 (a) x 34.5 (d) in
0.75 (thick) in
2 Sides: 22.5 (a) x 17 (c) x 0.75 (thick) in

Vent Parts
1 Top, 1 Bottom: 6.5 (e) x 35 (h) in
0.75 (thick) in
2 Sides: 12 (g) x 35 (h) x 0.75 (thick) in




all in all those subs are not that great ported, you'd be better off getting a sub that likes ported boxes.

SethPhillips
05-08-2007, 01:34 PM
well sounds like i should do that then!!!

so i should get some Fi's huh???