View Full Version : Im confused now...

05-05-2007, 12:29 PM
Looking at Moe Lesters plans I noticed that in his port he has then length from the front of the box to end of the port and their seperate lengths....For example ( Red lengths inside port )

Is that the port length?

I always thought the port length in a slot port like that one was the length of the 2 peices of port inside the box were added together:confused:


EDIT: Or is it that the 2 peices of port had 3" added onto the dimensions because the port is 3" wide

05-05-2007, 12:31 PM
He's right. You measure down the center for any turns and start at the front edge of the port.