PDA

View Full Version : Rust on speaker terminal



chibahawk
05-04-2007, 06:30 PM
Would that cause anything more than cosmetic damage?

http://img502.imageshack.us/img502/170/dsc00102wl2.jpg

blackbonnie
05-04-2007, 08:21 PM
maybe some reisistance and bad connection

chucku
05-04-2007, 09:12 PM
Clean it up and maybe get some new screws but its nothing serious. Most, if not all door speakers that are not sealed get this corrosion. Being a saltwater boater Ive learned of preventitive maintenice. Try some grease, oil, vaseline or the best, dialectric grease and treat the surfaces.

Daishi
05-05-2007, 01:06 AM
put some pb on their or something and it should take the rust off.

konechiwa
05-05-2007, 10:11 AM
Would that cause anything more than cosmetic damage?

http://img502.imageshack.us/img502/170/dsc00102wl2.jpg

same thing happened to me, we have the same speaker too.

msrpIZtooMUCH
05-05-2007, 11:35 PM
Clean it up, get a new srcew, ring terminal etc. or whatever you are using for a connection, reassemble and put everything in place then put some of that corrosion resistant spray on it so that it don't happen again...what I do is spray the stuff on my finger then rub it onto the electrical connection. Works for me....years later still looks the same.