PDA

View Full Version : Box design in sticky



uzy
05-03-2007, 11:07 AM
hey

does anyone know which box design in the stickies will work best for a 15" RE SX at 3.5cubes, which box would hit hard???

drifterman33
05-03-2007, 11:20 AM
I would use the Re Box Calculator (not sure of address) thats the one i used for my 18" Fi bL

kicker06
05-03-2007, 11:21 AM
All of those online box calculators are not even close to correct.

drifterman33
05-03-2007, 11:25 AM
well i talked with scott from Fi and showed him that calculator and he was impressed with it....and i am building the box right now and nothing has gone wrong.

kicker06
05-03-2007, 12:27 PM
When you compare it to calculating by mathematical method, it's way off.

Enjoy your box.

Trixter
05-03-2007, 12:57 PM
All of those online box calculators are not even close to correct.

it depends on how you use them

kicker06
05-03-2007, 01:31 PM
for tuning and total box space, they are off.

drifterman33
05-03-2007, 02:54 PM
Ok so what would be my (TRUE) box calculations if i need a 51 width 19 height 19 depth.....and tuned to 35hz with

sqhertz
05-03-2007, 03:05 PM
i used the re box calc for cutsheet when i built the box for my assassin.
given i had the varibles that i could edit in there. it worked fine.

uzy
05-03-2007, 03:48 PM
so which one of the designs in the sticky topic would be best for the SX if i wanted a box size of 3.5cubes

j3bus2k3
05-03-2007, 03:51 PM
look for a tuning inb/w 30-34 for the best daily results...

And that RE Calc is flawed, it does NOT take into account driver displacment...

uzy
05-03-2007, 04:50 PM
look for a tuning inb/w 30-34 for the best daily results...

And that RE Calc is flawed, it does NOT take into account driver displacment...

could you maybe show me the link to the one you think will work well