PDA

View Full Version : Tweeter Blend/Polarity



dirthog
05-03-2007, 09:17 AM
I guess it does help to read the manual. I have a component setup for my front stage and the tweeter/ woofer never sounded right, something was off. After looking at the manual to see if there was anything about an active setup I read.

If it seems that the tweeters and drivers are
not “blending” seamlessly, change the polarity
of both tweeters by reversing the positive
(+) and negative (-) tweeter wires at the
crossover. Reversing the phase of the tweeters
will usually optimize the blending of the
system components when the tweeters and
drivers are located far apart from each other.

This made all the difference in the world! Man I love these speakers.