View Full Version : 6x9's in a Cutlass

05-02-2007, 11:02 PM
My 85 Cutlass has little room between the magnet of my rear 6x9's and the trunk support bars. Is there a adaptor that will lower the speakers? If not will the RF 6x9 three ways be a good choice? I know they'll fit.


05-02-2007, 11:19 PM
what year?

edit- i see 85, just lay like 4 of them across the back deck

05-03-2007, 12:42 AM
You have 4x10s back there now correct?

There is an adapter but I have never seen it.

Just keep the 4x10s until you set serious about car audio.

05-03-2007, 08:03 AM
the 6 x 9 adapters ****. I had them in my Monte Carlo... If you really want 6 x 9's you could build a baffle on the rear deck and you will need to cut some sheet metal to get them to fit right. Once you get them in there it will be nice.

05-03-2007, 08:18 AM
honestley, take out the whatever you have now in the rear deck, stock is 4x10, leave the holes there for the bass to get through from your subs, front is 4x6 which *****, cut holes in the doors and get some good coaxial or componet 6 1/2 to go there

05-03-2007, 08:26 AM
cosign on the last 2 replies. The cut/components would sound best

05-03-2007, 08:34 AM
You need to cut out the whole rear deck...then build a baffle board out of MDF and put as many 6x9's as it can hold...You should be able to put at least 6 and get you a good 6 pack going....then maybe add a couple of pairs of horns...that should sound sweet.....

05-03-2007, 05:08 PM
Set Serious? Didn't know a high end 12 and a sundown wasn't serious.....anyway. I have the 6x9 adaptors and I'm not cutting up my car. I just want some good 6x9s with out hacking **** and making it fit. FYI read my sig before u tell me i have 4x6's in the front.....:wow:


05-04-2007, 10:02 PM