View Full Version : Flat Black box?
04-30-2007, 03:56 PM
What would be the best way to go about painting my box flat black? I have seen people paint there boxes shiney black, but I really didn't like that.
04-30-2007, 03:57 PM
sand,primer, sand, primer sand, flat black paint, sand, flat black paint??
04-30-2007, 03:59 PM
I don't know.
04-30-2007, 04:05 PM
And with what grit?
04-30-2007, 04:36 PM
First coat or two should be rough, then get progressively finer sand paper as you add more coats.
04-30-2007, 06:36 PM
Sanding paint isn't really the best idea. I would say do a few coats of spray paint flat black and then get the cheapest, most ghetto truck bed liner spray from an auto parts store. The ghetto stuff will leave a non-textured flat black coating. I know mine did when I used it. It was pretty durable too.
04-30-2007, 06:52 PM
I would brush it on as it's a LOT easier and I'm guessing you're not looking for a show finish, so no reason to paint/sand/paint/sand....
You can brush it on very thick, so it'll cover minor imperfections. Just do one surface at a time, horizontal, so no runs/drips.