PDA

View Full Version : need help planning box



Bagged96Chevy
04-27-2007, 06:54 PM
im building a box for 2 kicker l7's 12"
would it be better to make it were each sub is in its own box or have them in the same box?
ported or sealed?
i dont know how to get the best sound out of my subs?
and i dont know how to figureout what size box i need
thanks to all who reply

CRAZYCORNUTS18
04-27-2007, 06:55 PM
how much air space do they need? then you can figure how big the box need to be

Bagged96Chevy
04-27-2007, 10:02 PM
sealed .88 cu.ft. min 2.0 cu.ft. max
vented 1.75 cu.ft. min 3.25 cu.ft. max

oglejust
04-28-2007, 12:33 AM
go 5-5.25 cubes 36-38hz

Bagged96Chevy
04-28-2007, 02:20 AM
um mind explaining a little more im a bit of a nub
i have no clue what u mean by go 5-5.25 cubes? thanks for the help if u wouldnt mind explaining though....
and i want this setup to be loud as in people hear me coming if that helps any Thanks!

iamamp3pimp
04-28-2007, 04:11 AM
]
go 5-5.25 cubes 36-38hz

thats too high


use this. I give credit to Moe Lester, as its who made this design.

http://img35.imageshack.us/my.php?image=5cubes34hz75sqin1us.png
threaad is stickied here for more

oglejust
04-28-2007, 10:20 AM
for 2 12's u go 2 to 2.5 cubes each which = 4-5 cubes however L7's like bigger boxes so i would go around 5 cubes but thats just me dont go over 5.25 cubes tho. i really wouldnt go under 4 cubes either

Bagged96Chevy
04-28-2007, 10:57 AM
hmm ok thx

Bagged96Chevy
04-28-2007, 01:56 PM
i need to do smaller single enclosures i have 12 inches wide x 12inches high and then the length i can play with a little

fwb_1234
04-28-2007, 01:59 PM
i dont understand where this is going. explain what vehicle you have and the type of space you have to put this thing in.

Bagged96Chevy
04-28-2007, 02:27 PM
ok i have a 96 chevy ext. cab truck and i dont want to remove my back seat so im building a custom console that runs down the middle of the truck and im gonna put the subs in it... so i need someone to help me design a box thats 12x12x48 inches and is tuned to 34hertz .. i also need the port coming out of the end of it on the bottom.. and the subs comin out the top if this helps any

iamamp3pimp
04-28-2007, 02:31 PM
I can do that for you.

it will be a tad on the small side, seeing as how you have well under 4 cubes gross to play with.

Bagged96Chevy
04-28-2007, 02:34 PM
Let me go measure what size we can do

Bagged96Chevy
04-28-2007, 07:47 PM
http://img100.imageshack.us/img100/9172/sizeofspaceup5.gif
total of 55.5 " length i believe but notice i cant go 12 high in the front or the back so its gonna be close maybe help me with designing the port? i would like for the port to shoot the under the rear seat

iamamp3pimp
04-28-2007, 07:50 PM
whats the highest that you are willing to go?



12?

PM me.