PDA

View Full Version : HELP on VOLUME for e12kd4



TRDevelopment
02-09-2003, 09:03 PM
hello i need help on the enclosure volume for an e12kd4 ( ONE ) that will go into the wheel well. i already calculated the volume 1.3 is the max volume for mr wheel well. IS THIS ENOUGH FOR AN E12Kd4? if by anychance i go ported is the volume still ok=. and how big will my port hole be?

PLS BADLY NEED THE HELP!

mgaidica
02-09-2003, 09:18 PM
1.3 if fine for a K, 1.0 is fine, even .8 will sound awsome. although, it isnt big enough for porting most likely.

TRDevelopment
02-09-2003, 09:29 PM
is it ok to hook an e12kd2 on a JBL 600.1 or its better to have a e12kd4 on a JBL 600.1

mgaidica
02-09-2003, 09:55 PM
if your only using one edk, and want to give it 600 watts, then im pretty sure you should get a 4 ohm and wire it in paralell to itself. +/+, -/-

dont judge your purchase off that, but im almost posstive thats how you would produce a 2 ohm load (the 600.1 puts out 600 watts at 2 ohms)

Savant
02-09-2003, 10:00 PM
Please only post any given question once.. this is the second time you are asking the same question..