PDA

View Full Version : here we go again.... anyone need 3d sketches? no pm's



mobeious
04-22-2007, 09:06 PM
here we go again.... anyone need 3d sketches?


No PM's

uhoh45
04-22-2007, 09:07 PM
38x22x22

18" apx tuned to 50

req
04-22-2007, 09:12 PM
34 wide
16 tall
27 deep

5x14.5 in port tuned to ~30hz 18"sub on top, port on back

lets see what you got. cutsheet too ;)

bigj06040
04-22-2007, 09:13 PM
24 wide
19 height
14 deep

one 12" idq tuned 30

orioles26
04-22-2007, 09:16 PM
13 high
34 wide
28 deep

2 type r 12"s tuned to 35 hz

Calikid
04-22-2007, 09:16 PM
width- 48
height-17.25
deep-22

2 18"

tuned to 30

subs up port forward laying down prefer to not be the whole 48" wide.thnx.

and cutout sheet

PsychoTheRapist
04-22-2007, 09:24 PM
45" wide
17 " tall
26" deep


2 15" on top double baffled
14.75" x 8" port out the back
tuned @ 35hz.

mobeious
04-22-2007, 09:33 PM
Req ur doin freeair?

BigOso
04-22-2007, 09:44 PM
32wide X 18 deep X 14 Tall tuned to 37 cutsheet if you have the time. Its for 2 Atlas squares.

req
04-22-2007, 09:49 PM
Req ur doin freeair?

for a buddy of mine down the hall who is gettin an RLP 18 D2 :)

but yes. free air install is all done pretty much. thanks for asking :yumyum:

mobeious
04-22-2007, 09:50 PM
bigj
http://i7.photobucket.com/albums/y290/mobeious/box1.jpg

orioles
http://i7.photobucket.com/albums/y290/mobeious/box2.jpg

bigj06040
04-22-2007, 09:52 PM
thanks

loud-n-low
04-22-2007, 09:52 PM
31 wide x 16 tall X whatever deep....3.6 cu ft tuned to 27 hz

traksta15
04-22-2007, 09:56 PM
12x12x28 tuned to 37, for an 8" L7, downfiring

cut sheet too please

Nukedsodapop
04-22-2007, 09:56 PM
27.75 Wide
17.5 Deep
14.5 Tall

Tuned to 33Hz

1 12 MX on top with port in front

mobeious
04-22-2007, 10:11 PM
ok guys i didnt expect this mass... bare with me... if u want full custom plans with cutsheet and eveything... they are going to cost u PM me if u want full plans

savagebee
04-22-2007, 10:13 PM
10 Cubes tuned to 35 hertz
2 18"s

48" wide
21" tall

SkronnyLonny
04-22-2007, 11:18 PM
3.5 cubic tuned to 32
40x15x(your choice)
sub port facing up

bassexplorer85
04-25-2007, 12:04 AM
4 12 kicker comp vr's need at least 2 cubes per sub @32hrz subs up port back
width- 40

height-25

depth- what ever need be

SiX
04-25-2007, 02:06 AM
Render me a box/wall design for a new-gen Camaro that will house 4 18"s facing forward directly behind the driver and passenger, with the port running vertically down the middle. ~30 cubes after all displacement and ~300 sq in of port tuned to 30 Hz... :yumyum: :yumyum: :yumyum:

drifterman33
04-25-2007, 12:49 PM
51 Wide
19 Deep
19 Tall

Tuned to 35Hz

1 18'' Fi Bl on top with port in front

shiipseki
04-25-2007, 10:49 PM
if you have time,
18.25L x 16H x 31.25W
40hz w/ ~14-16 sq"'s of port area per net cubic foot of box.

Thanks