How much MDF did you use?

[JeremiahCoffel]

How much MDF was used in yout custom box build? Please include specs of the box and sqare feet of MDF.

[azbass]

um. right..

[xterra_on_22s]

2 sheets for the first build of mdf 8ft^3
1 sheet for the second build classic birch 6ft^3

[twisztdauthorit]

less then 1 sheet for a box around 4ft^3

[JeremiahCoffel]

Hey thanks, I wanted to know this because I was doing the math last night, and for a 3ft^3 box, it said I would only need about 20Sq and 17Sq for another 3Ft^3 design. So I should be goot with 1-2 sheets for these?

[Immacomputer]

This image has a shot of the enclosure and all the panels I used. The panels used are colored red and the large rectangle is a full sheet of MDF. The enclosure was 2.5 cubic feet with doubled rear panels.

http://i19.tinypic.com/2mo6lbq.png

[Team H&K]

I am doing a build right now for bass race, it is using right at 7 full sheet, I may even crack into an 8th sheet by the time its done, all single layer 3/4" MDF, 4 x 8 ft sheets, is turning out to be a big build

[twisztdauthorit]

I am doing a build right now for bass race, it is using right at 7 full sheet, I may even crack into an 8th sheet by the time its done, all single layer 3/4" MDF, 4 x 8 ft sheets, is turning out to be a big build

how big is this box and how thick are the walls?
thats like 200$ of mdf

[Fast1one]

I usually use a sheet per, anywhere from a transmission line to 3 cubes +