PDA

View Full Version : Sketch Needed for Subs



Po.Sic
04-13-2007, 04:06 PM
Hey guys,
I have 2 Hifonics AS12SQ subs which will be powered by a bxi2006d, currently i have a prefab box :suicide: , disgusting i know. Any chance someone could post up a sketch of a box build for these subs? Im looking for pure SPL.

Trunk Dimensions:

Max. Enclosure Height: 21

Max. Enclosure Width: 45

Max. Enclosure Depth: 41

Sub Specs:

Subwoofer Size 12"
Dual Voice Coil Yes
Impedance Dual 2 ohm
Peak Power Handling 1800 watts
RMS Power Handling 900 watts
Woofer Surround Rubber
Woofer Composition N/A
Sealed Box Volume 1.5 cubic feet
Ported Box Volume 1.5 cubic feet
Sensitivity 85.88 dB

Fs = 37.32 Hz
Qts = 0.38
Vas = 21.5 Liters
Xmax = 22mm
SPL = 95.65dB @ 2.83v

If i am missing anything, let me know i will get it up asap.

Thanks!

Twistid
04-13-2007, 04:11 PM
you know theres about 50 million designs already made for you in one of the stickys

blackbonnie
04-13-2007, 04:22 PM
^^^double time

audiobahnuser18
04-15-2007, 04:13 AM
alright guy's help em out i know i got sketchup off of here someone was glad enough to help me help this guy out im getting him the box built by me and actually a friend of mine save em cash he just needs the sketchup would appericate the help guys thanks:).

rpfuror
04-15-2007, 11:14 AM
"pure SPL" what freq you want to burp at and how much power you have?

audiobahnuser18
04-15-2007, 01:57 PM
he's working with a hifonics amp right , he want's SPL out of it . and as u can see he gave the specs for his trunk and sub's.

audiobahnuser18
04-15-2007, 01:59 PM
im not sure what he want's to burp it at but it's for a daily driver idk if he's gonna do any local comps around here or not.

rpfuror
04-15-2007, 02:07 PM
Thats what I'm questioning... a pure spl car is much different from a daily driver tuning will will be drastically different.

as far as power, I'm questioning what is the ratio of what the amp will put out against what the drivers will take...

If you have a lot of power to spare you can work with a lot more port (which can be better for SPL) if your over powering the drivers you may not want as much area.

So refer to my first question above and I can help out with the design.

audiobahnuser18
04-16-2007, 01:28 AM
He has One hifonics amp i know that much one of them but i will find out the model 2morro for sure rp he's not online right now. but i will 2morro