View Full Version : will this be ok for my db500's

04-12-2007, 11:48 AM
I am using the re enclosure calculator and came up with this 4.108cf @33.8Hz with 58.5in of port the box is 30" wide 14.5" high 25" deep and a port that is 4.5" wide and cut to 19" long and how mutch will my sub Displacement of .16cf change the tuning of the box and the subs will have about 800 watts to them in the trunk of my lincoln LS how do you think it will sound will it hit to low notes that I wont the subs have a hard time hiting them in the 2.5cf seald box they are in right know dont get me wrong the subs are nice in a seald box but I wont to shake my car apart from the low nots and my box now will not do it

04-12-2007, 11:53 AM

04-12-2007, 11:56 AM
how many of them you got in that box? the displacement of the subs will tune the box lower. in most cases it doesnt change tuning more than a 1 hertz

04-12-2007, 12:00 PM
I cant spell:crying: and I think I mesd up will my subs fit on the baffel the Basket Diameter is 12.65 and the front of the box is onely 24.75 I might cut the holes for the subs off center one closer to the top and one near the bottem if that will help

04-12-2007, 02:16 PM
periods would help.