PDA

View Full Version : Help Me Design a box for 2 Mach5 High Excursions



AAckley1
04-11-2007, 01:39 PM
So I have figured out that I have about 20 cubes of room in the trunk of the Caddy, and I've decided to go with two Mach5 Audio IXLs.

Based on help from the CA.com Mach5 guy, Mark, he said I would need something in the range of 15 cubes, tuned to 30 hz.

I'm no good at 3-D Design so if someone could do a 3D mockup for me, I would appreciate it.

danteBirosel
04-11-2007, 01:43 PM
If you need a 3D design, you can check out the portfolio of these guys here:

CAJunkyard.com Enclosure Designers (http://www.caraudiojunkyard.com/forum/forumdisplay.php?f=20)

Just post on there forum on what you need and will get back to you asap. :)

mlstrass
04-11-2007, 01:57 PM
I'm guessing you "might" have to build 2 boxes or plan on assembling one big one inside the trunk...

AAckley1
04-11-2007, 02:04 PM
yes i know im going to have to build it in the trunk, I just want an idea of port size and dimensions and such

rpfuror
04-11-2007, 02:53 PM
you should first post what the dimensions that you have to work with... then I can give you a design.