PDA

View Full Version : Box Design



uzy
04-10-2007, 04:42 PM
hey

im trying to design a box for the RE SX 15" i made a box but im not sure if it looks correct

http://www.subwoofertools.com/forum/ported-box.asp?Ew=29&Eh=16&Dia=9&Xmax=22&Vd=0.22&NumW=1&Vb=3.5&Fb=32&Qts=&Vas=&Fs=&CE=0

also were do i mount the sub woofer, and also should i smooth all the edges of the wood involved in the port area. and should i also put silicon sealent in each of the joins in the wood so its all smoooth:fro:

tc300
04-10-2007, 05:01 PM
u can put it on the RED board(front) of the box.

mlstrass
04-10-2007, 05:14 PM
Do you really need 65^2 or port for that sub? Not familiar with RE specs, so that's why I ask.

If that's too much you can change the xmax until you get the desired port size.

uzy
04-11-2007, 07:09 AM
Do you really need 65^2 or port for that sub? Not familiar with RE specs, so that's why I ask.

If that's too much you can change the xmax until you get the desired port size.

well im not sure either thats why i was asking if it was aright, obviously im a newbie to this. i used the x max form the sub and its 22mm. i put in all the stuff i needed such as the box size and tuning frequency, xmax, and driver displacment. i got all the info off the re internet site.