PDA

View Full Version : RE box builder



uzy
04-07-2007, 07:04 PM
hey

lol this may sound very stupid but does anyone know what unit of measurment the RE box builder works in, as i want to design a box and i put in the measurments i have in inches and it makes a massive box.

skadude016
04-07-2007, 07:06 PM
pretty sure its inches

CRAZYCORNUTS18
04-07-2007, 07:07 PM
wuts the measurements

jeremiah
04-07-2007, 07:19 PM
X2^^

uzy
04-08-2007, 07:42 AM
the measurments for my whole boot area are 41" width 19"height and 28" depth
im trying to make a box for a RE SX 15", i designed one but ive been hearing alot of stuff about how you have the port done, could somone explain how to do it

CRAZYCORNUTS18
04-08-2007, 07:57 AM
theres alot of ways to do a port and the reason its coming up with a massive box is because its big box 41'' width thats long

Decado
04-08-2007, 08:03 AM
theres alot of ways to do a port and the reason its coming up with a massive box is because its big box 41'' width thats long

The RE15 needs a big box...

CRAZYCORNUTS18
04-08-2007, 08:06 AM
The RE15 needs a big box...

o i know that but hes asking y when he puts the measurements in y it comes up so big and im say cuz it is big the measurements alone should say that its big

uzy
04-09-2007, 08:21 AM
i made a box by using the box builder and its width is 27" the height is 16" and the depth is 21".

the square port width is 2.75" and the sqare port length is 1" and that gives a volume of 3.625 and a tuned frequencey of 32.191

does that seem right?????

oh yeah and were shall i mount the sub is it closest to the port or does it not matter

p.s the reason i got such big measurments for the box is because i read my tape measure wrong i used Cm instead of inches lol silly me

ngsm13
04-09-2007, 09:31 AM
That thing *****, bad.

FAR from ideal, and inaccurate.

nG

uzy
04-09-2007, 10:35 AM
That thing *****, bad.

FAR from ideal, and inaccurate.

nG

well what box builder should i use then to make a good box, also does the woofer hav to be mounted near the port or does it not matter

Skip01
04-09-2007, 01:19 PM
This ones ok:

http://www.subwoofertools.com/forum/ported-box.asp