PDA

View Full Version : enclosure help



BigAl
04-02-2007, 07:23 AM
Is there a site that i can go to where there are plans of various boxes. I want to try to make a sealed box for my two 120xe,s. I need to find the dimensions for a sealed box. Manufacturer recommends 75-1.25per sub.

bjfish11
04-02-2007, 07:28 AM
Sealed is easy. The formula to figure volume is length x width x height / 1728. Keep in mind these are INTERNAL measurements. So if your using 3/4" material, you can just measure the outside of the box, and subtract 1 1/2".

BigAl
04-02-2007, 07:39 AM
that is what i need ,the outside measurements for the wood. Im new at this so if i sound like a newb it is because i am. any help would be appreciated.

bjfish11
04-02-2007, 07:42 AM
Not a problem. Tonight, I can come up with some dimensions for you if you still dont have any.

BigAl
04-02-2007, 01:41 PM
Thanks man that would be great. I want to try and start making my own boxes. I am going to try sealed first because i know that would be the easiest for a first timer.

mlstrass
04-02-2007, 02:22 PM
http://www.the12volt.com/caraudio/boxcalcs.asp#wed2

Use the squar/rectangle calculator. Only thing you need to do is account for the subs displacement/bracing and work the specs out to that size....