PDA

View Full Version : 9510f Spring Break Build...



DeuceLee
03-29-2007, 07:35 PM
Box: 1.5 cubes net, tuned to 38hz, 33 sq inches of port area, 3/4 inch on the ends

Getting ready to add the top…

http://img483.imageshack.us/img483/1695/boxanglehx4.jpg (http://imageshack.us)

http://img86.imageshack.us/img86/3600/boxtopgt4.jpg (http://imageshack.us)

Has the top on.

http://img483.imageshack.us/img483/6730/boxfrontcv4.jpg (http://imageshack.us)

Finished product...yes, that is 8 guage speaker wires, overkill? just alittle...

http://img66.imageshack.us/img66/4456/finishboxfrontwm7.jpg (http://imageshack.us)

Box with amp…

http://img63.imageshack.us/img63/2869/boxampni2.jpg (http://imageshack.us)

http://img483.imageshack.us/img483/6222/boxsubfinishkx9.jpg (http://imageshack.us)

SD208’s with 1.4 cube box tuned to 36 with 4 inch port…box was build previously for two 10's sealed...i added the 4 inch port...

http://img45.imageshack.us/img45/8286/sd208boxanglesp3.jpg (http://imageshack.us)

Link to the Sub thread (http://www.caraudio.com/forum/showthread.php?t=224362)

Immacomputer
03-29-2007, 11:56 PM
Looks pretty sick! You should tape the ends up when you paint the port next time so that you don't get paint all over the ends that are going to be glued.

blackbonnie
03-30-2007, 12:04 AM
****, love that sub. hows it sound?

Wkbdkid
03-30-2007, 12:46 AM
looks good, i like the round over port.. Ive never messed with 10s but isnt 33sq.in. of port area a lil small?

lilmaniac2
03-30-2007, 12:48 AM
i think u need bigger boxes and more port area

PV Audio
03-30-2007, 01:07 AM
http://img45.imageshack.us/img45/8286/sd208boxanglesp3.jpg

You know, it would have been better had you mounted the subs on the top baffle as well. Even still, 1" MDF would have been sufficient alone.

Immacomputer
03-30-2007, 02:12 AM
http://img45.imageshack.us/img45/8286/sd208boxanglesp3.jpg

You know, it would have been better had you mounted the subs on the top baffle as well. Even still, 1" MDF would have been sufficient alone.

The enclosure was for two 10s originally so I don't think that would have been possible with the way he did it.

DeuceLee
03-30-2007, 08:55 AM
i think u need bigger boxes and more port area

i was orginally going to do a 2.0 with 40sq inch of port but dd said 1.5 and 24sq in of port was good enough:crap:

i do kinda regret it now not going with my orginal plans...i think that would have been better...

DeuceLee
03-30-2007, 08:56 AM
The enclosure was for two 10s originally so I don't think that would have been possible with the way he did it.

correctomondo

baseballer1100
03-30-2007, 11:23 AM
Thats pretty ******.

DeuceLee
03-30-2007, 11:32 AM
Thats pretty ******.

thanks...

for the seams where the two different carpet met, i first screwed the box together then drew a line where the side piece of the box met the top,bottom,front and back pieces, then took my circular saw and saw a 1/4 inch deep line through that line i drew, that way i had some space to tuck the extra carpet into so it looks cleaner...

dleccord
03-30-2007, 12:19 PM
dd still offers cf dust caps?

DeuceLee
03-30-2007, 12:42 PM
dd still offers cf dust caps?

i dont know bout the g's...

PV Audio
03-30-2007, 12:58 PM
The enclosure was for two 10s originally so I don't think that would have been possible with the way he did it.
Mm, didn't see that.

dleccord
03-30-2007, 01:09 PM
the blank carbon fiber is sick

PV Audio
03-30-2007, 01:16 PM
Oh, I meant to say as well, your construction looks very nice. The only thing I'd be careful with is the corners. If you take up box building seriously like fishface, myself, baseballer etc. then it may be good to practice that a bit more. I don't know about every customer that exists, but some don't want carpet and would rather have paint, vinyl, etc. When you have rough edges, the thickness of carpet allows you to get away with it. Not with anything else thoughh. So, if you could improves with the sander, you'd have some flawless work thurr. :)

smd4life
03-30-2007, 01:19 PM
****.....

PV Audio
03-30-2007, 01:21 PM
^^ I see you've met our friend civic si :laugh:

smd4life
03-30-2007, 01:54 PM
^^ I see you've met our friend civic si :laugh:

yeah i have...he teaches me about turbo civic's and what not....and also how make offers on things in the classifieds and never buy anything, he's great for a laugh

bk12321
03-30-2007, 02:00 PM
**** carbon fiber setup

I just wanna buy some carbon fiber dustcaps now so i can be cool too

traksta15
03-30-2007, 02:39 PM
nice box, I like it

DeuceLee
03-30-2007, 02:59 PM
Oh, I meant to say as well, your construction looks very nice. The only thing I'd be careful with is the corners. If you take up box building seriously like fishface, myself, baseballer etc. then it may be good to practice that a bit more. I don't know about every customer that exists, but some don't want carpet and would rather have paint, vinyl, etc. When you have rough edges, the thickness of carpet allows you to get away with it. Not with anything else thoughh. So, if you could improves with the sander, you'd have some flawless work thurr. :)

yeah i hear ya, i slacked off on purpose cus i didn't have much time and i knew i was gonna carpet anyways...thanks tho...

on my list of things to get next is a da sander for painting these bishes...:fro: