PDA

View Full Version : 99 mustang components



500000watts
03-25-2007, 09:41 PM
ok. im replacing my stock mustang speakers... so far i have boston s60 for the front.. for a while i wont have subs so im lookin for something that bumps a little for a speaker to put in the back..

what would you suggest i put in the back to go alone with my bostons in the front..

DejaWiz
03-26-2007, 11:10 AM
What size do you need and will you be amping them?

500000watts
03-26-2007, 10:23 PM
they are either 6 by 9s or smaller.. they are that shape tho. my brothe should be getting it home tonight and i could take a look and measure them..

but yes they will be amped with my front at about 50 watts

Sunfire01
03-26-2007, 10:42 PM
They should be 6x8s front and back, I have inspected a 95 non-GT

500000watts
03-27-2007, 09:33 AM
i hope not 6 8 in the front.. im planing to put my 6.5 bostons up there

DejaWiz
03-27-2007, 09:50 AM
i hope not 6 8 in the front.. im planing to put my 6.5 bostons up there

You should hopefully be able to fit them in with very minor fabricating.

jdawg
03-27-2007, 09:50 AM
i hope not 6 8 in the front.. im planing to put my 6.5 bostons up there

although you can make an adapter plate wouldnt it be a good idea to make sure what size speakers you have factory before you buy new ones?

99StangGt
03-27-2007, 10:32 AM
I will tell you for sure they are 5x7 speakers and you will have to fabricate to get 6.5 speakers in there. Its not all that hard. i just use 3/4 mdf and a rotozip.

DejaWiz
03-27-2007, 10:34 AM
I will tell you for sure they are 5x7 speakers and you will have to fabricate to get 6.5 speakers in there. Its not all that hard. i just use 3/4 mdf and a rotozip.

Straight from the horse's mouth. ;)