PDA

View Full Version : cdt 560i crossover settings help



69420potsmoker
03-24-2007, 06:17 AM
I would like to make some adjustment on the loudness of my tweeters compared to the midbass and I thought this was done with the +3db, 0db, -3db etc. settings. I looked at the crossover and there are no settings for this visible only image tweeter/main tweeter outputs.

Does this crossover not have these tweaking options?

If not then this crossover is garbage

and by the way is this forums server screwed or what? I always have some kind of error/connection problem. Ive been sitting here trying to post this message forever

mannyb18b
03-24-2007, 06:35 AM
and you made 4 threads why?

69420potsmoker
03-24-2007, 06:38 AM
and by the way is this forums server screwed or what? I always have some kind of error/connection problem. Ive been sitting here trying to post this message forever


Didnt meant to, I kept hitting the button to post I guess 4 times over a 10 minute span and then finally it worked and there was 4 posts. Thats what I mean

mannyb18b
03-24-2007, 06:44 AM
I have the same set and mine have the adjustments. I dunno

69420potsmoker
03-24-2007, 06:50 AM
well Ive just taken the top grille off and looked and see nothing. Is it on the bottom or something where I need to get it out of the plastic casing?

69420potsmoker
03-24-2007, 07:33 AM
there is an adjustment for the 5 inch or 6 inch woofer I see but nothing else

Hopefully someone can delete the other threads

darren700
03-24-2007, 07:37 AM
the main tweeter is 0db and the image tweeter is -3db... thats all you get with the 560's

69420potsmoker
03-24-2007, 07:41 AM
thanks and wow thats bullshit for an upgraded crossover.


And what would happen if I put a negative wire into the image and positive to the main or the other way around?

darren700
03-24-2007, 08:56 AM
i dunno but i wouldnt suggest it... you may end up frying something...

just buy an eq if you want to adjust the tweets more accurately... or go active