PDA

View Full Version : I Need a Receiver and Plate Amplifier



GCAdidas13
02-28-2007, 11:51 PM
Hey guys.

I need a receiver with 5+ inputs (Video switching is not needed), a subwoofer out, and the fronts can be highpassed around 70-80 hz. Currently I want to run just a 2.1 setup, but in the future I might want to upgrade to 5.1 or something.

I was looking at the Sony STR-DG500 (http://www.bestbuy.com/site/olspage.jsp?skuId=7697478&st=sony+receiver&lp=2&type=product&cp=1&id=1138084389847), mostly because I like Sony amplifiers. Any opinions?

I also need a plate amplifier that I will be using for multiple projects over time, but initially I'm going to be powering an IDQ 8 in 0.5 cubes. I should definitely leave room for improvement, so I was thinking about doing a 500w plate amp and being careful with it, and then I could go bigger when I move out.

For this I was thinking about either the Bash 500W or Dayton 500W at PartsExpress, but the Bash is out of stock and the Dayton seems like a steep price.

Any help on this will be appreciated.
Thanks!
Brian

docutech
03-01-2007, 12:23 AM
I have a MINT Denon AVR 3000 with manual and remote. Pm me if interested

Scoobydoo
03-01-2007, 05:42 PM
The only decent Sony is the ES line, anything else is crap, dont bother