PDA

View Full Version : my ED 12" box, look!



rain377
01-29-2003, 07:24 PM
if you are facing the subs together i would recommend setting them up isometricly. what you would wanna do is put the speakers as close as possible to each other with out them hitting. then reverse the polarity on one of the subs. this in turn will make them hit together and will produce a very nice sound.

mgaidica
01-29-2003, 07:50 PM
really? so face them on an angle as much as possible?

choochooSS
01-30-2003, 09:17 PM
dont forget to reverse the polarity on one
or they will cancel each other out and sound like sh*t

Moocow16
01-30-2003, 09:20 PM
agreed

mgaidica
01-30-2003, 09:22 PM
how do i reverse the polarity?

choochooSS
01-30-2003, 09:25 PM
switch the + and -

mgaidica
01-30-2003, 09:27 PM
on the amp?

choochooSS
01-30-2003, 09:31 PM
on the sub
well either way you do it it will still be switched
just do it on the sub to keep things straight

mgaidica
01-30-2003, 10:07 PM
http://www.edesignaudio.com/ep/wiring.htm

(2) D2 - Dual 2ohm Subwoofer : 2 ohm load. ( High Impedance option )



if i wire them like that diagram is that polarity already reversed? (will i b ok if i just wire my subs like that and wire possitive-possitive negative-negative on the amp)