PDA

View Full Version : i've Lost it



lrgnation
02-27-2007, 12:12 AM
Here are my plans...

Going active with a set of cdt m6 drivers off a jl audio 300/2

Going passive hd-4/drt-26 CDT 4" and 1" tweeters off a another 300/2

Running an FI SSD 12" off a 500/1

Right now I have an audio control LC6, 300/2 and 500/1. (another 300/2 is coming soon)

All on a stock 06 mustang shaker500 deck, Hence the LC6 Line Output controller

What active xover should I run to split the front rca pre-out from the LC6. I need to be able to adjust the high pass and low pass cut offs.


Can I just use an Audio Control 2xs 2 way xover and use the 300/2 to adjust the high/low pass settings

60ndown
02-27-2007, 12:18 AM
[/B]



why high and low? just split the signal and lett your amps xovers do the rest.

lrgnation
02-27-2007, 12:31 AM
why high and low? just split the signal and lett your amps xovers do the rest.

Would the amp's xover work fine for this application for the m6's?

And the cdt passive crossover splits that signal and filters out everything by itself?

So I could just use the Audio Control 2xs which just splits the signal, Or should I use the 24xs. Whats the difference?

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1250

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1251