PDA

View Full Version : help with speaker choice



jr2320
02-20-2007, 01:47 PM
lookin for some help.im buyin speakers for my mustang.i can go with 5x7 or 6x8 on the door.does it really matter with the size.im not goin to be hookin it up to a amp right away.wats a decent speaker to get for the price.

bri487
02-20-2007, 01:50 PM
if you are looking for a bolt in solution. the boston SL80 is the best thing you could put in there. the pioneer rev tsd-680r is right up there with them, which i ran for a while in my mustang.

jr2320
02-20-2007, 01:51 PM
wat year is ur mustang

jr2320
02-21-2007, 12:57 AM
can any1 help me with this.lookin to buy a decent set.thanks

LoudCrownVic
02-21-2007, 01:01 AM
The boston's sound great. Go with those. They respond greatly to being amped.

jr2320
02-21-2007, 01:05 AM
those are like 200 and somethin.didnt want to spend that much yet on door speakers

LoudCrownVic
02-21-2007, 01:07 AM
Okay...

IMO they'd be worth it. Have a good day.

lrgnation
02-21-2007, 01:11 AM
I would go with some components like 5.25" with 1 " tweeter in your situation and just make a metal adapter plate.

LoudCrownVic
02-21-2007, 01:15 AM
I can fit 7" Dayton RS mids in the 6x8 holes in teh Fords... YOu can probably put in 6.5" comps if you wanted.

jr2320
02-21-2007, 01:16 AM
that sounds hard.just want a little upgrade for now.

jr2320
02-21-2007, 01:29 AM
i was thinkin along these lines.
http://www.cardomain.com/shop/list.pl?type_plural=2-Way+Speakers&x=53&y=14&start=21&show=20
http://www.cardomain.com/item/INFREF6012SI?vq_id=none

bdawson72
02-21-2007, 01:33 AM
bostons

jr2320
02-21-2007, 01:38 AM
if i can get them on here for a good deal then yea.

mlstrass
02-21-2007, 01:48 AM
6.5" REV's will sound nice amped. Go to your local CC and demo what they have...

bri487
02-21-2007, 02:28 AM
wat year is ur mustang

98 cobra. i sold it two years ago. had another 98 int he family and a 68.
i think i am going to drop in some SL80's in my dads F150 soon.

dragonrage
02-21-2007, 03:57 AM
Hard? You get a speaker ring, drill some holes and put in some sheet metal screws.

bri487
02-21-2007, 10:04 AM
Hard? You get a speaker ring, drill some holes and put in some sheet metal screws.
nevermind the half inch gap on either side of the ring.

jr2320
02-23-2007, 08:33 PM
ok so im lookin at infinity ref 6812cf or 6810cf.which one should i get?

KotnmthKng
05-06-2007, 04:18 AM
Will either size (5x7 or 6x8) fit in the factory holes with out modification?

Im looking to get some Rainbow SLC 238's for my 97 Cobra.