PDA

View Full Version : wiring subs in series in a 3 chambered sealed box?



lost1700
02-15-2007, 09:00 AM
How would you wire three subs in series in a box with dividers seperating each sub?

jmanpc
02-15-2007, 09:02 AM
depends... is there a terminal cup for each chamber?

lost1700
02-15-2007, 09:13 AM
im designing my first box and was wondering how I would do this, do the terminal cups go in the dividers or on the outside of the box. Do I need 1 or two for each sub?

jmanpc
02-15-2007, 09:14 AM
I'd just put a terminal cup or binding posts on the outside for each chamber for wiring ease

lost1700
02-15-2007, 09:22 AM
would it be a bad idea to put them on the bottom that the box sits on to hide the wires?

jmanpc
02-15-2007, 09:23 AM
if the box slides, the wires can come out of the terminals easily.

lost1700
02-15-2007, 09:24 AM
the box will not be sliding. This will be inside the cab of my truck and will be visible. So i dont want a bunch of wires hangin around

singlefordrange
02-15-2007, 09:37 AM
very interesting because i am thinkin about puttin three 10's in my ranger sealed!

lost1700
02-15-2007, 09:52 AM
Im putting three 8's, tyring to design my box now