PDA

View Full Version : Port problem

CJL
02-15-2007, 01:22 AM
I need to get a 16.5" Port lenth but im a little confused...

http://img252.imageshack.us/img252/6565/portcn1.jpg (http://imageshack.us)

If the pic dont make sense ill try to explain it better.

rooneypower
02-15-2007, 01:28 AM
just make one long port. That is the easiest way. or bend it like u have it. just add the 11" on the other side of the L. A.K.A its called a L port. look at my pic for example...http://i157.photobucket.com/albums/t64/rooneypower/part431.jpg
one long port... 28" long

sandbags
02-15-2007, 01:29 AM
if your port is 6.5 wide i would try to keep it the same distance from the back wall. if that means the inside of the port is 11 inches then just put in another piece in an L shape to the right that is 5.5inches

CJL
02-15-2007, 01:37 AM
if your port is 6.5 wide i would try to keep it the same distance from the back wall. if that means the inside of the port is 11 inches then just put in another piece in an L shape to the right that is 5.5inches

I see what your saying but, I always thought that you figure out port lenth by port end correction?(i.e. the blue line in the middle of the port)

icpurplepplalot
02-15-2007, 01:40 AM
you determine port lengt but how big ur box is and what you want it tuned to

sandbags
02-15-2007, 01:42 AM
what he said^^

CJL
02-15-2007, 01:45 AM
you determine port lengt but how big ur box is and what you want it tuned to

I know that, I meant when your drawing box plans and or building the box. ;)

icpurplepplalot
02-15-2007, 01:49 AM
I still really don't have a clue what ur asking

maldecido33
02-15-2007, 02:26 AM
I see what your saying but, I always thought that you figure out port lenth by port end correction?(i.e. the blue line in the middle of the port)

thats not what your port end correction factor is....