PDA

View Full Version : cansomebody help figure box PLEASE!!



sslacker
02-13-2007, 06:51 PM
not very good with math but could someone tell me how many square ft. the enclosure is and tuning frequency if i give the measurments?? Thanks


The box is 34" wide by 16"high, 22 " deep!!!!


The port is 6" wide 16" high and will be 16" deep!!


looking to tune about 36-38 hertz, just trying to see if I am close!!!
Thanks for the response!!!

These are internal dimensions by the way!!

matt_martin87
02-13-2007, 07:23 PM
What is your net volume? And if this is a typical L-port box, how can the port be 14" tall but the box 16" tall?

sslacker
02-13-2007, 07:31 PM
Sorry port is 16" tall will fix

matt_martin87
02-13-2007, 07:34 PM
That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.

sslacker
02-13-2007, 07:41 PM
That doesn't make sense either lol. If your box has an external height of 16", than the port is 14.5" tall, assuming there is no double baffles and you used 3/4" MDF.

Just to clear things up external measurments are as follows
35&1/2" wide by 17&1/2" high by 23&1/2" deep!!

Hope this clears things up

sslacker
02-13-2007, 08:51 PM
help anyone????

Lonewolf32
02-13-2007, 09:30 PM
Just going by what you gave that would be tunned at about 41 hz. I got this by saying you used a net Volume of 6 cuft
(the internal volume - Port displacement).