PDA

View Full Version : Anyone need a ported or sealed box design



sxpimpin
02-11-2007, 04:28 PM
I'm feelin bored. Give me your max dimensions, subs and what your looking for sound wise and I'll give it a shot..

schleppydotnet
02-11-2007, 06:44 PM
This sub:
http://www.polkaudio.com/caraudio/products/mm100/

I want to use it indoors hooked into my computer for listening to music, and the occasional video game. Sealed or ported, I don't care. .625" MDF would be great (it's what I have). No size limits to speak of...

bluelceii
02-11-2007, 06:51 PM
15" FI Q
32W x 14 H x 26D
tuned to 30-33Hz
2.8-4 cubes
Just whatever you can get that's best.
oh and sub up and port back (kinda obvious......)
I'll be using the XX-Zeus

sxpimpin
02-11-2007, 06:54 PM
Alright give me a sec I'll whip it up in Bass box pro

sxpimpin
02-11-2007, 06:56 PM
How much power will you have on that polk sub?
Depending on that is how big I'll go on the box...

pboulos
02-11-2007, 06:56 PM
Memphis mojo 12" dual 2
42"wide 15" tall 15" deep and an assload of port area (tuned in the 31-35 range)
looking for about 3 cubes
sub has an 8" mounting depth
all going in an expedition
last edit, lol- sub up port back

will have 1500 watts to it

sxpimpin
02-11-2007, 07:02 PM
For the 15" Q...
I've got one 4.3 cuft, 43.75 inches of port tuned to 32 hz

Dimensions are your max. port 12.5inches tall by 3.5 inches wide and 23" deep

sxpimpin
02-11-2007, 07:09 PM
For the Mojo 12-

Max dimensions..
Port is 13.5 tall by 4inches wide so 54 inches total. You gotta go 34 inches deep with it to get a tuning of 35hz and the box will be exactly 3.0cuft after all displacement.

bluelceii
02-11-2007, 07:13 PM
For the 15" Q...
I've got one 4.3 cuft, 43.75 inches of port tuned to 32 hz

Dimensions are your max. port 12.5inches tall by 3.5 inches wide and 23" deep

u gonna sketch it?

sxpimpin
02-11-2007, 07:17 PM
I can sketch it..
but do you know how to upload it as a jpeg?

Fast1one
02-11-2007, 07:19 PM
I can sketch it..
but do you know how to upload it as a jpeg?If your using sketchup, just go to file then export to 2D object. Or something like that...

bluelceii
02-11-2007, 07:20 PM
If your using sketchup, just go to file then export to 2D object. Or something like that...

or just email it...

seg_representin
02-11-2007, 07:24 PM
2 kicker L5's...can be 2 seperate boxes doesn't matter. Max dimensions: 32 in by 25 in x 14 in. It might have to be 2 seperate boxes to fit in my trunk but not sure. I got a 2000 grand am. And for power i got an ed nine.1. And for tuning i would like to get pretty loud. I listen to all rap so i was thinkin in the 30 to 34 hz range but what do you think would be good to tune it at?

sxpimpin
02-11-2007, 07:40 PM
For the Fi Q

http://img20.imageshack.us/img20/570/boxforfiqor3.th.png (http://img20.imageshack.us/my.php?image=boxforfiqor3.png)

Supergumby5000
02-11-2007, 07:44 PM
you people rock lol. im helping a buddy build a new box for his blazer:

3 memphis 10's

1.25cubes-ish per sub at 35hz, so anywhere around 3.75-4 cubes would be awesome.

max dimensions: 36" across, height as small as possible, and depth anything under 26"

sciononhub's
02-11-2007, 07:46 PM
4 dd 1008 ported aero or slot peaking about mid 50's
Dimensions:
Length:49 1/2
Width:18
Depth:37 1/2

05fronty
02-11-2007, 07:54 PM
ok i have 2 12" infinity reference subs. size don't matter going in back of extended cab frontier. which box would be better? 750 watts rms going to them.

Calikid
02-11-2007, 07:57 PM
2 18" fi btl

max dimensions:

w: 48" H:20" D: 24"

subs up , port back horizontal

tuned to 28hz

PV Audio
02-11-2007, 07:58 PM
Need a custom box designed? PM me :D
Get that out of your sig.

PV Audio
02-11-2007, 07:59 PM
And I hope that you do realize that BBP6 isn't made for just plugging in values and expecting greatness, you can't just put in your numbers and expect it to work. You have to do work by hand.

Chevyaudio
02-11-2007, 08:01 PM
Yep...

We all have to follow the rules...

no advertising.


and x2 on BBP 6.

bluelceii
02-11-2007, 08:05 PM
For the Fi Q

http://img20.imageshack.us/img20/570/boxforfiqor3.th.png (http://img20.imageshack.us/my.php?image=boxforfiqor3.png)


with that and the cuts you sent me, I could be wrong but, I checked all that and if my math is correct, I'm getting a tunning of around 26Hz... I'll pass. thanks anyways

PV Audio
02-11-2007, 08:10 PM
with that and the cuts you sent me, I could be wrong but, I checked all that and if my math is correct, I'm getting a tunning of around 26Hz... I'll pass. thanks anyways
What did you expect? He made you a box plan in under 30 minutes, including sketching...:uhoh:

bluelceii
02-11-2007, 08:21 PM
What did you expect? He made you a box plan in under 30 minutes, including sketching...:uhoh:

heh I see you don't like this kid for some reason. But I was just seeing if he actually knew what he was doing. but... he doesn't so...oh well :rolleyes:

Calikid
02-11-2007, 08:23 PM
he logged off, i wonder why, LOL

PV Audio
02-11-2007, 08:23 PM
I don't dislike him, I don't even know who the hell it is. I just found it humorous that he downloaded a couple programs and is dishing out horribly inaccurate designs which will wind up costing other people money when they have to rebuild.

Chevyaudio
02-11-2007, 08:26 PM
I take my time when I design boxes, I have a calculator pen and paper handy, and just get to work...

If I sit down and do it all at once, usually takes an hour or two with a fully rendered drawing, and a rendered cutsheet and a .doc cut sheet.

fawd06
02-11-2007, 08:32 PM
I take my time when I design boxes, I have a calculator pen and paper handy, and just get to work...

If I sit down and do it all at once, usually takes an hour or two with a fully rendered drawing, and a rendered cutsheet and a .doc cut sheet.

still waiting on my design for the 2-12btl. lol its been past 1hr

Crown_amps
02-11-2007, 08:34 PM
12'' alpine type s home thearte set up

size doesnt matter

aim is sheer 50/50 sq /spl tuned low

dimensions dont matter

big slot port to push air for da lows

and a small sealed sealed box for the same sub to get a lot of excursion and punch from it but pure sq even at the cost of output

Chevyaudio
02-11-2007, 08:38 PM
still waiting on my design for the 2-12btl. lol its been past 1hr

I ran into problems with yours, im on aim now hit me up

PV Audio
02-11-2007, 08:50 PM
I take my time when I design boxes, I have a calculator pen and paper handy, and just get to work...

If I sit down and do it all at once, usually takes an hour or two with a fully rendered drawing, and a rendered cutsheet and a .doc cut sheet.This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

bluelceii
02-11-2007, 08:55 PM
This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

hell I take almost an hour on the most simple designs... I haven't found any "quick routes" yet

Calikid
02-11-2007, 08:56 PM
This is true. Usually takes around 2 hours, and I really only use BBP to see the graphs of what it will look like, and to check my work. Anyone making a box design in 15 minutes either is Thiele himself, or doesn't know what the hell he's doing.

:word: i agree with birthday boy:D

sxpimpin
02-11-2007, 09:21 PM
I would have to disagree until you can prove me wrong.

With that box i come up with a tunning of 31 hz...off by 1

Are you using 3/4 mdf for the port also?
taking into account of some added bracing?

sxpimpin
02-11-2007, 09:22 PM
As for everyone else. I didn't know i would get this many requests it'll probably be tomorrow before i can catch up with all of you.

bluelceii
02-11-2007, 09:35 PM
I would have to disagree until you can prove me wrong.

With that box i come up with a tunning of 31 hz...off by 1

Are you using 3/4 mdf for the port also?
taking into account of some added bracing?

yup... 3/4 mdf. no bracing... i'm good man don't worry bout it :cool:

sxpimpin
02-12-2007, 11:54 AM
Anyone who seriously needs a box design pm me.. or aim floridaguy1988

sxpimpin
02-12-2007, 05:25 PM
http://img489.imageshack.us/img489/5610/4jlw3boxbv7.th.png (http://img489.imageshack.us/my.php?image=4jlw3boxbv7.png)

Box for the 4 JL audio W3 12's
Right at 8 cuft 90inches of port tuned to 36hz for that LOUDness you were going for.

DRMVP21
02-12-2007, 07:19 PM
2 pioneer ts-w3004spl. max dimensions are 38W x 14H x 21D. Powered by bxi1606d. 32hz tuning

Octavio
02-12-2007, 08:56 PM
I'm feelin bored. Give me your max dimensions, subs and what your looking for sound wise and I'll give it a shot..

Desing a box for me please, I own a CVR12 Kickers 2 vioce coils , thanks
your help would be pay on the name of the lord

sxpimpin
02-12-2007, 08:57 PM
Holy cow!!
If you need a box PM me I get to those first...

sxpimpin
02-12-2007, 10:24 PM
Box for 3 memphis 10's Pm me for dimensions. Its right at 4 cuft tuned to 35 hz with 44inches of port.

http://img482.imageshack.us/img482/9652/72417012uc2.th.png (http://img482.imageshack.us/my.php?image=72417012uc2.png)

uhoh45
02-12-2007, 11:46 PM
30 long x30 wide x20 high top firing port 1 18 " woofer

sxpimpin
02-13-2007, 07:31 PM
http://img244.imageshack.us/img244/248/hx2boxyq7.th.png (http://img244.imageshack.us/my.php?image=hx2boxyq7.png)

Box for the lexus and two rf hx2 12's.. 4cuft tuned to 35hz

32" wide 15" tall 22" deep
port 3" by 13.5 by 18 inches deep

sxpimpin
02-15-2007, 04:29 PM
http://img441.imageshack.us/img441/1069/boxforl7sma9.th.png (http://img441.imageshack.us/my.php?image=boxforl7sma9.png)

Box for the pair of L7 15's..

Right around 4.75 cubic feet per chamber tuned to 34-35 hz.

Gianotti
02-15-2007, 04:53 PM
thanks man

jmoreno150
02-15-2007, 05:01 PM
bought my girl 2 of these. ported slot port whatever way you can make them pound.


http://i156.photobucket.com/albums/t5/jmoreno150/SPECS.jpg

sxpimpin
02-15-2007, 05:19 PM
Do you have any max dimensions?

Erthshker
02-15-2007, 06:00 PM
How bout one for me??......2 15" Audioque HD3.....dimensions - 42W x 18H x 28D....ported nd lookin for like 8ft3 @ 40hz.....thanks....

sxpimpin
02-15-2007, 06:36 PM
http://img20.imageshack.us/img20/32/212boxnz6.th.png (http://img20.imageshack.us/my.php?image=212boxnz6.png)

for jmoreno- 4.4 cuft tuned to 34 hz
max dimension's 2.5 by 16" port 20 inches deep

sxpimpin
02-15-2007, 06:46 PM
Give me a while on that 2 15 HD3 box..I'll come up with something real nice...

Fast1one
02-15-2007, 07:04 PM
Lol look at him go...

sxpimpin
02-15-2007, 07:35 PM
Thanks...?

littledude
02-15-2007, 08:44 PM
i need a better box.

2 alpine type r 12's dvc4

around 34-36htz

2.5cu.ft per chamber

mr_kebo
02-15-2007, 08:47 PM
1 18" BTL 8cuft tuned to 33hz with 150sqin of port sub discplacment is .26. Sub up port back double top baffle. Max dimensions are 49W x 24H x 30D
Roughly 7k of power

schleppydotnet
02-15-2007, 08:50 PM
For that Momo I will probably only end up with 250ish watts going to it.

sxpimpin
02-15-2007, 08:59 PM
I will have those new ones done tomorrow...

JOHNJOHN485
02-15-2007, 09:00 PM
one xxx 15 4cf@27hz 38x16x23 ????????????????????/